[opensuse] Can't run VirtualBox
I downloaded and installed the openSUSE VirtualBox RPM from virtualbox.org. While it installs OK and I can install a virtual machine, when I try to run the VM it fails. I have tried installing DKMS and also virtualbox-guest & host modules, along with X11 drivers. I have included the log below. Any ideas? tnx jk linux:~ # more /var/log/vbox-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxhost/4.3.12/source -> /usr/src/vboxhost-4.3.12 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.11.10-11-desktop -C /lib/modules/3.11.10-11-desktop/build M=/var/lib/dkms/vboxhost/4.3.12/bu ild....(bad exit status: 2) Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-deskt op/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/inclu de -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x 86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/ua linux:~ # cat /var/log/vbox-install.log Uninstalling modules from DKMS Attempting to install using DKMS Creating symlink /var/lib/dkms/vboxhost/4.3.12/source -> /usr/src/vboxhost-4.3.12 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... make KERNELRELEASE=3.11.10-11-desktop -C /lib/modules/3.11.10-11-desktop/build M=/var/lib/dkms/vboxhost/4.3.12/build....(bad exit status: 2) Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-desktop/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/include -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-3.11.10-11/include/linux/kconfig.h -I/tmp/vbox.0 -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -pipe -Wno-sign-compare -fomit-frame-pointer -fasynchronous-unwind-tables -g -include /tmp/vbox.0/include/VBox/SUPDrvMangling.h -I/lib/modules/3.11.10-11-desktop/build/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/ -I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/.tmp_SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c /bin/sh: gcc: command not found make[4]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 127 make[3]: *** [_module_/tmp/vbox.0] Error 2 make[2]: *** [sub-make] Error 2 make[1]: *** [all] Error 2 make: *** [vboxdrv] Error 2 make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-desktop/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/include -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-3.11.10-11/include/linux/kconfig.h -I/tmp/vbox.0 -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -pipe -Wno-sign-compare -fomit-frame-pointer -fasynchronous-unwind-tables -g -include /tmp/vbox.0/include/VBox/SUPDrvMangling.h -I/lib/modules/3.11.10-11-desktop/build/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/ -I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/.tmp_SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c /bin/sh: gcc: command not found make[4]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 127 make[3]: *** [_module_/tmp/vbox.0] Error 2 make[2]: *** [sub-make] Error 2 make[1]: *** [all] Error 2 make: *** [vboxdrv] Error 2 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Hi, Am 29.05.2014 23:15, schrieb James Knott:
I downloaded and installed the openSUSE VirtualBox RPM from virtualbox.org. While it installs OK and I can install a virtual machine, when I try to run the VM it fails. I have tried installing DKMS and also virtualbox-guest & host modules, along with X11 drivers. I have included the log below.
I'm confused.... you installed the openSuSE packages or you installed the rpm from the website? The openSuSE packages don't work for me, the packages from the website do the job here. Karl
Any ideas?
tnx jk
linux:~ # more /var/log/vbox-install.log Uninstalling modules from DKMS Attempting to install using DKMS
Creating symlink /var/lib/dkms/vboxhost/4.3.12/source -> /usr/src/vboxhost-4.3.12
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area.... make KERNELRELEASE=3.11.10-11-desktop -C /lib/modules/3.11.10-11-desktop/build M=/var/lib/dkms/vboxhost/4.3.12/bu ild....(bad exit status: 2) Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-deskt op/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/inclu de -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x 86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/ua linux:~ # cat /var/log/vbox-install.log Uninstalling modules from DKMS Attempting to install using DKMS
Creating symlink /var/lib/dkms/vboxhost/4.3.12/source -> /usr/src/vboxhost-4.3.12
DKMS: add completed.
Kernel preparation unnecessary for this kernel. Skipping...
Building module: cleaning build area.... make KERNELRELEASE=3.11.10-11-desktop -C /lib/modules/3.11.10-11-desktop/build M=/var/lib/dkms/vboxhost/4.3.12/build....(bad exit status: 2) Failed to install using DKMS, attempting to install without make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-desktop/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/include -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-3.11.10-11/include/linux/kconfig.h -I/tmp/vbox.0 -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -pipe -Wno-sign-compare -fomit-frame-pointer -fasynchronous-unwind-tables -g -include /tmp/vbox.0/include/VBox/SUPDrvMangling.h -I/lib/modules/3.11.10-11-desktop/build/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/ -I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/.tmp_SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c /bin/sh: gcc: command not found make[4]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 127 make[3]: *** [_module_/tmp/vbox.0] Error 2 make[2]: *** [sub-make] Error 2 make[1]: *** [all] Error 2 make: *** [vboxdrv] Error 2 make KBUILD_VERBOSE=1 SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 CONFIG_MODULE_SIG= -C /lib/modules/3.11.10-11-desktop/build modules make -C /usr/src/linux-3.11.10-11-obj/x86_64/desktop \ KBUILD_SRC=/usr/src/linux-3.11.10-11 \ KBUILD_EXTMOD="/tmp/vbox.0" -f /usr/src/linux-3.11.10-11/Makefile \ modules /usr/src/linux-3.11.10-11/arch/x86/Makefile:92: stack protector enabled but no compiler support /usr/src/linux-3.11.10-11/arch/x86/Makefile:107: CONFIG_X86_X32 enabled but no binutils support make[3]: gcc: Command not found test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /tmp/vbox.0/.tmp_versions ; rm -f /tmp/vbox.0/.tmp_versions/* make -f /usr/src/linux-3.11.10-11/scripts/Makefile.build obj=/tmp/vbox.0 gcc -Wp,-MD,/tmp/vbox.0/linux/.SUPDrv-linux.o.d -nostdinc -isystem -I/usr/src/linux-3.11.10-11/arch/x86/include -Iarch/x86/include/generated -I/usr/src/linux-3.11.10-11/include -Iinclude -I/usr/src/linux-3.11.10-11/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/usr/src/linux-3.11.10-11/include/uapi -Iinclude/generated/uapi -include /usr/src/linux-3.11.10-11/include/linux/kconfig.h -I/tmp/vbox.0 -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -O2 -m64 -mno-red-zone -mcmodel=kernel -maccumulate-outgoing-args -pipe -Wno-sign-compare -fomit-frame-pointer -fasynchronous-unwind-tables -g -include /tmp/vbox.0/include/VBox/SUPDrvMangling.h -I/lib/modules/3.11.10-11-desktop/build/include -I/tmp/vbox.0/ -I/tmp/vbox.0/include -I/tmp/vbox.0/r0drv/linux -I/tmp/vbox.0/vboxdrv/ -I/tmp/vbox.0/vboxdrv/include -I/tmp/vbox.0/vboxdrv/r0drv/linux -D__KERNEL__ -DMODULE -DRT_OS_LINUX -DIN_RING0 -DIN_RT_R0 -DIN_SUP_R0 -DVBOX -DRT_WITH_VBOX -DVBOX_WITH_HARDENING -Wno-declaration-after-statement -DCONFIG_VBOXDRV_AS_MISC -DRT_ARCH_AMD64 -DVBOX_WITH_64_BITS_GUESTS -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(SUPDrv_linux)" -D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/.tmp_SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c /bin/sh: gcc: command not found make[4]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 127 make[3]: *** [_module_/tmp/vbox.0] Error 2 make[2]: *** [sub-make] Error 2 make[1]: *** [all] Error 2 make: *** [vboxdrv] Error 2
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 05/29/2014 05:21 PM, Karl Sinn wrote:
I downloaded and installed the openSUSE VirtualBox RPM from virtualbox.org. While it installs OK and I can install a virtual machine, when I try to run the VM it fails. I have tried installing DKMS and also virtualbox-guest & host modules, along with X11 drivers. I have included the log below.
I'm confused.... you installed the openSuSE packages or you installed the rpm from the website? The openSuSE packages don't work for me, the packages from the website do the job here.
I first tried the openSUSE ones, in Yast and, like you. found they didn't work. I then uninstalled them and installed the RPM from virtualbox. I was now able to install the ovm, but not run it. The log message I included was after attempting to run the VM. I then tried installing the other kernel modules and it still didn't work. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
Wait, first you said: On 5/29/2014 2:15 PM, James Knott wrote:
I downloaded and installed the openSUSE VirtualBox RPM from virtualbox.org. While it installs OK and I can install a virtual machine,
Then you paste (bunch of stuff trimmed)
-D"KBUILD_MODNAME=KBUILD_STR(vboxdrv)" -c -o /tmp/vbox.0/linux/.tmp_SUPDrv-linux.o /tmp/vbox.0/linux/SUPDrv-linux.c /bin/sh: gcc: command not found make[4]: *** [/tmp/vbox.0/linux/SUPDrv-linux.o] Error 127 make[3]: *** [_module_/tmp/vbox.0] Error 2 make[2]: *** [sub-make] Error 2 make[1]: *** [all] Error 2 make: *** [vboxdrv] Error 2
I'm amazed you got as far as you did. Are you sure you turned on visualization options in your bios? -- _____________________________________ ---This space for rent--- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 05/29/2014 05:26 PM, John Andersen wrote:
Are you sure you turned on visualization options in your bios?
They weren't. I turned them on and it still failed. I then uninstalled everything for virtualbox that I had installed and then re-installed the package. It appears to be working now. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 05/29/2014 07:38 PM, Carlos E. R. wrote:
The message is obvious, gcc is not installed. Why?
Actually, it was installed. However, as I mentioned in another note, I've got it going now. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
On 05/29/2014 05:15 PM, James Knott wrote:
I downloaded and installed the openSUSE VirtualBox RPM from virtualbox.org. While it installs OK and I can install a virtual machine, when I try to run the VM it fails. I have tried installing DKMS and also virtualbox-guest & host modules, along with X11 drivers. I have included the log below.
I now have VirtualBox running on both my desktop and notebook computers. On my desktop, I have installed an Ubuntu VM for an online course I'm taking. Just for fun, I installed OS/2 and Windows 98 on my notebook. Of course in OS/2, I can also fire up a Windows 3.11 (WinOS2) session. That gives me Windows 3.11 running on OS/2 running on Linux! ;-) -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org
participants (4)
-
Carlos E. R. -
James Knott -
John Andersen -
Karl Sinn