Hi, I use SuSE 10.2 under VMWare Fusion on the Mac. I would like to use the remote control. Linux recognizes the IR: sb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: new device found, idVendor=05ac, idProduct=8242 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: IR Receiver usb 1-1: Manufacturer: Apple Computer, Inc. usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: new device found, idVendor=0e0f, idProduct=0002 usb 1-2: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-2: Product: VMware Virtual USB Hub usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 7 ports detected usbcore: registered new driver hiddev input: Apple Computer, Inc. IR Receiver as /class/input/input3 input: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:07 .2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver I also started rclircd with the configuration for A1156, but I do not get any signals. irw does not say anything. My suspision is that Linux recognizese the USB device, but does not know that it is a IR device. Is there a way to test, wether signals come over USB? Is there something I could do about the LIRC setup? Thanks and greetings Stefan cat /proc/bus/input/devices I: Bus=0003 Vendor=05ac Product=8242 Version=0016 N: Name="Apple Computer, Inc. IR Receiver" P: Phys=usb-0000:00:07.2-1/input0 S: Sysfs=/class/input/input3 H: Handlers=event3 B: EV=1 -- Stefan Müller Tel: (+49) (+30) 838 52973 Fax: (+49) (030) 838 4 52973 Institut für Deutsche und Niederländische Philologie Deutsche Grammatik Boltzmannstraße 3 D-14195 Berlin http://www.cl.uni-bremen.de/~stefan/ http://www.cl.uni-bremen.de/~stefan/Babel/Interaktiv/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org