Just got a brand new external CDRW (Gericom enclosure see below for model) and it doesnt work. Its connected to my firewire port. I tried writing just two (wav) tracks to a CD and it crashes out with the same error: linux:/video/test # cdrecord dev=1,0,0 -eject speed=2 -pad -audio *.wav cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.31 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identifikation : 'CD/DVDW TS-H552U' Revision : 'US03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 8 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x0 (GOOD STATUS) cmd finished after 179.972s timeout 40s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. [1]+ Stopped cdrecord dev=1,0,0 -eject speed=2 -pad -audio *.wav Not much in /var/log/messages other than this. It crashed out so I dont know exactly how it tallies sorry. I did turn it off/on a few times though (as you can see). Any help would be appreciated! Mar 3 20:16:07 linux kernel: ieee1394: Initialized config rom entry `ip1394' Mar 3 20:16:07 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> Mar 3 20:16:07 linux kernel: ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 11 (level, low) -> IRQ 11 Mar 3 20:16:07 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffb800-faffbfff] Max Packet=[2048] Mar 3 20:16:09 linux kernel: ieee1394: Node added: ID:BUS[0-00:1023] GUID[005077059a00105c] Mar 3 20:16:09 linux kernel: ieee1394: Host added: ID:BUS[0-01:1023] GUID[434fc0003126e410] Mar 3 20:16:09 linux kernel: ieee1394: unsolicited response packet received - no tlabel match Mar 3 20:16:12 linux /sbin/hotplug[13725]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13767]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13761]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> Mar 3 20:16:14 linux kernel: scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices Mar 3 20:16:14 linux /sbin/hotplug[13763]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13765]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:15 linux kernel: ieee1394: sbp2: Logged into SBP-2 device Mar 3 20:16:15 linux kernel: ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Mar 3 20:16:15 linux kernel: Vendor: TSSTcorp Model: CD/DVDW TS-H552U Rev: US03 Mar 3 20:16:15 linux kernel: Type: CD-ROM ANSI SCSI revision: 02 Mar 3 20:16:15 linux kernel: sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray Mar 3 20:16:15 linux kernel: Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Mar 3 20:16:15 linux kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 5 Mar 3 20:16:25 linux /etc/dev.d/block/50-hwscan.dev[14185]: new block device /block/sr0 Mar 3 20:16:25 linux /etc/dev.d/block/51-subfs.dev[14195]: mount block device /block/sr0 Mar 3 20:17:26 linux cdrecord: resmgr: server response code 200 Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux cdrecord: resmgr: server response code 200
I have never tried firewaire / Linux, but I was in a Linux Seminar this afternoon and some very smart people said the 2.6.x firewire support was very iffy. If you want reliable firewire support across numerous platforms, they said you should revert to the 2.4.x kernel. For SUSE Pro, that means reverting to 9.0. Note that none of the above was SUSE specific. Greg On Thu, 3 Mar 2005 21:38:14 +0100 (CET), George Reynolds <linux@dodgybloke.co.uk> wrote:
Just got a brand new external CDRW (Gericom enclosure see below for model) and it doesnt work. Its connected to my firewire port. I tried writing just two (wav) tracks to a CD and it crashes out with the same error: linux:/video/test # cdrecord dev=1,0,0 -eject speed=2 -pad -audio *.wav cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling Note: This version is an unofficial (modified) version Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.31 Using libscg version 'schily-0.8'. cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.83-resmgr-patch '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'TSSTcorp' Identifikation : 'CD/DVDW TS-H552U' Revision : 'US03' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 8 in real TAO mode for single session. Last chance to quit, starting real write 0 seconds. Operation starts. cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x0 (GOOD STATUS) cmd finished after 179.972s timeout 40s write track data: error after 0 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above.
[1]+ Stopped cdrecord dev=1,0,0 -eject speed=2 -pad -audio *.wav
Not much in /var/log/messages other than this. It crashed out so I dont know exactly how it tallies sorry. I did turn it off/on a few times though (as you can see).
Any help would be appreciated!
Mar 3 20:16:07 linux kernel: ieee1394: Initialized config rom entry `ip1394' Mar 3 20:16:07 linux kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> Mar 3 20:16:07 linux kernel: ACPI: PCI interrupt 0000:02:04.1[A] -> GSI 11 (level, low) -> IRQ 11 Mar 3 20:16:07 linux kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffb800-faffbfff] Max Packet=[2048] Mar 3 20:16:09 linux kernel: ieee1394: Node added: ID:BUS[0-00:1023] GUID[005077059a00105c] Mar 3 20:16:09 linux kernel: ieee1394: Host added: ID:BUS[0-01:1023] GUID[434fc0003126e410] Mar 3 20:16:09 linux kernel: ieee1394: unsolicited response packet received - no tlabel match Mar 3 20:16:12 linux /sbin/hotplug[13725]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13767]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13761]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> Mar 3 20:16:14 linux kernel: scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices Mar 3 20:16:14 linux /sbin/hotplug[13763]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:14 linux /sbin/hotplug[13765]: ... no drivers for IEEE1394 product 0x/0x/0x Mar 3 20:16:15 linux kernel: ieee1394: sbp2: Logged into SBP-2 device Mar 3 20:16:15 linux kernel: ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048] Mar 3 20:16:15 linux kernel: Vendor: TSSTcorp Model: CD/DVDW TS-H552U Rev: US03 Mar 3 20:16:15 linux kernel: Type: CD-ROM ANSI SCSI revision: 02 Mar 3 20:16:15 linux kernel: sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray Mar 3 20:16:15 linux kernel: Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 Mar 3 20:16:15 linux kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 5 Mar 3 20:16:25 linux /etc/dev.d/block/50-hwscan.dev[14185]: new block device /block/sr0 Mar 3 20:16:25 linux /etc/dev.d/block/51-subfs.dev[14195]: mount block device /block/sr0 Mar 3 20:17:26 linux cdrecord: resmgr: server response code 200 Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux kernel: module pg unsupported by SUSE/Novell, tainting kernel. Mar 3 20:17:30 linux kernel: pg: pg version 1.02, major 97 Mar 3 20:17:30 linux kernel: pga: Autoprobe failed Mar 3 20:17:30 linux kernel: pg: No ATAPI device detected Mar 3 20:17:30 linux modprobe: FATAL: Error inserting pg (/lib/modules/2.6.8-24.11-default/kernel/drivers/block/paride/pg.ko): Operation not permitted Mar 3 20:17:30 linux cdrecord: resmgr: server response code 200
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com
participants (2)
-
George Reynolds -
Greg Freemyer