Rajko M. wrote:
On Friday 09 November 2007 05:19:14 pm Rajko M. wrote:
Somewhat spartan Section "Modes". You can comment out that line too, like this: # Modeline "800x600" 38.34 800 832 928 1024 600 604 608 624 -HSync -VSync
Trigger finger :-) it wasn't finished.
Commenting out the line will allow Xorg to use highest mode that passes tests. You can look in /var/log/Xorg.0.log which modes Xorg has accepted.
The Xorg.0.log section where it probes modes can be used to pick up different modes for Section "Modes" in xorg.conf.
This is a section of the Xorg.0.log showing modes: (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "NvAGP" "1" (**) NVIDIA(0): Enabling RENDER acceleration (**) NVIDIA(0): Use of NVIDIA internal AGP requested (II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 262144 kBytes (--) NVIDIA(0): VideoBIOS: 04.34.20.87.00 (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce FX 5500 at PCI:1:0:0: (--) NVIDIA(0): @@@ (CRT-0) (--) NVIDIA(0): @@@ (CRT-0): 350.0 MHz maximum pixel clock (II) NVIDIA(0): Assigned Display Device: CRT-0 (WW) NVIDIA(0): No valid modes for "1024x768"; removing. (WW) NVIDIA(0): No valid modes for "1024x600"; removing. (WW) NVIDIA(0): No valid modes for "800x600"; removing. (WW) NVIDIA(0): No valid modes for "768x576"; removing. (WW) NVIDIA(0): No valid modes for "640x480"; removing. (WW) NVIDIA(0): (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode (WW) NVIDIA(0): "nvidia-auto-select". (WW) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 800 x 600 (**) NVIDIA(0): DPI set to (58, 58); computed from "DisplaySize" Monitor (**) NVIDIA(0): section option (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. This indicates to me that NVIDIA could not recognize the monitor at all (except that it is there.) Note the line "(II) NVIDIA(0): NVIDIA GPU GeForce FX 5500 at PCI:1:0:0 (GPU-0)." I have AGP (unless pci and agp slots are interchangeable. Maybe I should examine the card more closely.) So, my next question is: Could I obtain the proper mode lines by removing the card and using sax2 to generate a new xorg.conf file, since sax2 did this properly before I added the new card? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org