On 2014-09-02 02:17, Linda Walsh wrote:
Some might regard this as "ok", but I wouldn't.
The Raw Read Error Rate is non-zero, heck over 130billion,
seek error rate doesn't look good,
Not on a Seagate. They are typical values. Some of mine: Telcontar:~ # smartctl -a /dev/sda | grep Error_Rate 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 214928042 7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 100635483 Telcontar:~ # smartctl -a /dev/sdb | grep Error_Rate 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 59835741 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 82836624 Telcontar:~ # smartctl -a /dev/sdc | grep Error_Rate 1 Raw_Read_Error_Rate 0x000f 114 099 006 Pre-fail Always - 63128408 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 48111013 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 -- Cheers / Saludos, Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar)