SuSE 9.0 accepted files /etc/sysconfig/network/ifcfg-eth0:0 to setup a virtual device eth0:0 with a private IP, while eth0 was the public one.
In opensuse 10.0 it's diferent.
BOOTPROTO='static' BROADCAST='' IPADDR='192.168.0.32' MTU='' NAME='Dell 82562EZ 10/100 Ethernet Controller' NETMASK='255.255.255.0' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' UNIQUE='rAUF.4JaxctxhRiB' USERCONTROL='no' IPADDR_luna='192.168.0.31' NETMASK_luna='255.255.255.0' LABEL_luna='luna' _nm_name='bus-pci-0000:02:08.0'
Simple: IPADDR='192.168.222.1' IPADDR_2='10.10.10.10' NETWORK='192.168.222.0' NETWORK_2='10.0.0.0' NETMASK='255.255.255.0' NETMASK_2='255.0.0.0' etc. -`J' -- --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org