* don fisher <hdf3@comcast.net> [08-08-18 19:52]:
On 08/05/2018 07:20 PM, Patrick Shanahan wrote:
* don fisher <hdf3@comcast.net> [08-05-18 21:16]:
On 08/04/2018 11:05 PM, David C. Rankin wrote:
On 08/04/2018 10:43 PM, don fisher wrote:
I have read discussions concerning the wisdom of Opensuse not running current kernels. But I recently purchased an Alienware 13 3 that is near EOL, so it is not real bleeding edge technology. Neither the wireless nor Ethernet are supported, and now I find the the graphics chipset is not supported either. I was able to use a USB wireless transmitter, but I cannot get around the display hardware.
message about wireless in dmesg is: ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
Qualcomm Atheros Killer E2500 Gigabit Ethernet Controller is not configurable, except with a patch into the /sys directory found on the internet.
Message about the graphics chipset from the Nouveau list is:
"GP106 is supported, you must be using an older kernel (since yours says "unknown chipset")".
How dangerous is it to download on of the kernels from the Opensuse search site. Kernel.org says the latest stable release is 4.17.12. Under search/42.3/community packages, there are a few offerings shown at this revision level. How bad is it to install one of these kernels?
Don
Don,
It's not dangerous at all. openSuSE has long had the KOTD (kernel of the day) repository and the stable repository that offer the latest kernels. You can simply add the repo to your yast repositories and install and test the kernel, e.g.
https://download.opensuse.org/repositories/Kernel:/stable/standard
You can check your /etc/zypp/zypp.conf and make sure you have multiversion for the kernel enabled (I believe it is by default). That way when you install the new kernel from stable -- you will still have your current kernel installed on your machine. If things go south, just select the old kernel at the boot screen by selecting (I forget what the link is called, it is something like "Advanced Options" that is listed either below, or when you expand the highlighted boot entry at the boot screen). The 8sec countdown timer will stop when you do, so you can take your time and pick through the available kernels to boot.
Just confirm in /etc/zypp/zypp.conf you have:
multiversion = provides:multiversion(kernel)
and
multiversion.kernels = latest,latest-1,running
which keeps the running kernel, the kernel with the highest version, and the kernel with the next highest version by my read of the comments (though it is unclear if 'running' and 'latest' apply to the same kernel, the setting is evaluated by /sbin/purge-kernels, not libzypp)
Either way, you will still have your current and stable installed -- which you can boot to your old kernel in case of emergency and just delete the new stable one if it doesn't work out.
I checked and stable is 4.17.12 -- so if your hardware is supported by the latest kernel -- you will be in luck. Good luck.
I am afraid I failed. I was able to add the repo and download a 4.17.12-2 kernel, but not even the serial port or mouse would work. I used Yast to remove the package, but that did not work either because it still shows up as the default kernel to boot.
I choose a 4.14.60-1 kernel from the 42.3 search options, and at least the Ethernet works. Wireless still is on the rocks, and I do not know how to evaluate the video in Linux. The external port still dead. Are there any NVIDIA packages for linux that allow evaluation?
you can always install the nvidia package and then remove it using the install scriptas root: sh ./<NVIDIA-package>.run -aqs --install-libglvnd sh ./<NVIDIA-package>.run --uninstall
like: sh ./NVIDIA-Linux-x86_64-390.67.run -aqs --install-libglvnd
and there is sh ./<NVIDIA-package>.run --help sh ./<NVIDIA-package>.run -A --help
Is there a clean way to get rid of the 4.17.12-2 kernel parts left in /boot and /lib/modules? I can just delete them, but I am always afraid grub will get angry with me.
zypper -v rm 'rpm -q kernel |grep 4.17.12'
the system will update grub.
Could you please include more details. I do not appear to have any of the .run packages on my system, so do not know which directory to be in to execute the above scripts.
you need to download one matching your gpu from: http://download.nvidia.com/XFree86/Linux-x86_64/
As I mentioned previously, I attempted to download kernels from the opensuse search/kernel page, but did not achieve much success. The system would not allow a log off,
I have absolutely no idea what you are talking about.
and I found in the /lib/modules directory, many of the files in /new-kernel/weak-updates/updates/ were unresolved symbolic links. So I removed all if these kernel upgrades.
how did you remove them? zypper se -s kernel-default zypper --help zypper se --help
But I still find them listed in Yast2 as candidates for installation. I would also like to know how to clean up the Yast2 candidates list.
I don't use yast for installing/updateing. I use zypper from the command line. if I told you something about yast installing and/or updateing, it would probably not be correct. I find zypper so much more comprehensive and better suited, and easy to operate. I also feel your level of expertise is perhaps not up to the task you face and maybe you should question before acting as in "removed all if these kernel upgrades". after many years of linux, os2, cp\m, dos and others, I frequently need to research actions or ask questions before performing the act. and I frequently find that things I remember have changed or I really did not understand. man pages are a great reference although frequently cryptic and difficult to comprehend. or old age makes memories incorrect. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org