I am installing SuSE 6.4 CD Edition onto an HP Pavilion 6740C, and having problem getting the network card to work. I have looked through a few howtos and the knowledgebase with obviously not much success. I am hoping that someone on this list can point me to the right direction. Many thanks in advance, and now more details: the machine is Celeron 667 MHz, 69M RAM, and has the followings: - one hard drive, master ide0 - cd drive, master ide1 - two usb ports that are not used - internal modem that is not used - parallel port that is not used yast2 detects the card as Accton Tech. Corp. SMC2-1211TX, and after putting in network IP addresses it comes back with a message that because of a difficulty! the network in not accessible. The driver it picks is rtl8139 (per /etc/modules.conf) that according to www.scyld.com corresponds to EN1207D-TX which is the correct model number for the card (it is actually printed on the card). I tried adding the line options rtl8139 options=0x40 to /etc/modules.conf which did not help. I removed the argument options=0x40. BTW this machine is intended to be used as stand alone task specific development system with no services to offer and one Ethernet connection to LAN. If interested in more details here is machines response to few commands I thought helpful: Following is contents of the file 'report' linux:~ # dmesg 1>> report 2>&1 Linux version 2.2.14 (root@Pentium.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Fri Mar 17 11:59:50 GMT 2000 Detected 664652930 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1327.10 BogoMIPS Memory: 61272k/64448k available (1416k kernel code, 416k reserved, 960k data, 64k init, 0k bigmem) Dentry hash table entries: 8192 (order 4, 64k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium III (Coppermine) stepping 03 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfd9c0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Enabling I/O for device 01:68 PCI: Enabling memory for device 01:68 PCI: Enabling I/O for device 01:70 PCI: Enabling memory for device 01:70 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 64000K size loop: registered device at major 7 Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 40MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio hda: ST315323A, ATA DISK drive hdc: LG CD-RW CED-8083B, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ST315323A, 14652MB w/512kB Cache, CHS=1984/240/63 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 LVM version 0.8e by Heinz Mauelshagen (4/1/2000) lvm -- Driver successfully initialized md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 linear personality registered raid0 personality registered raid1 personality registered raid5 personality registered scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hda3 hda4 RAMDISK: Compressed image found at block 0 Uncompressing........................done. VFS: Mounted root (ext2 filesystem). usb.c: registered new driver usbdevfs usb.c: registered new driver hub VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 64k freed Adding Swap: 136072k swap-space (priority -1) Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A rtl8139.c:v1.08 6/25/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html rtl8139.c:v1.08 6/25/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0x3000, IRQ 0, 00:10:b5:65:87:64. ************* spacer *********** linux:~ # cat /proc/interrupts 1>> report 2>&1 CPU0 0: 209846 XT-PIC timer 1: 4524 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 2 XT-PIC rtc 12: 0 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 53197 XT-PIC ide0 15: 4 XT-PIC ide1 NMI: 0 ************* spacer *********** linux:~ # cat /proc/ioports 1>> report 2>&1 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 1800-1807 : ide0 1808-180f : ide1 3000-307f : eth0 ************* spacer *********** linux:~ # cat /proc/net/dev 1>> report 2>&1 Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 dummy0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ************* spacer *********** linux:~ # depmod 1>> report 2>&1 depmod: *** Unresolved symbols in /lib/modules/2.2.14/misc/airport.o depmod: *** Unresolved symbols in /lib/modules/2.2.14/misc/cpia_pp.o depmod: *** Unresolved symbols in /lib/modules/2.2.14/pcmcia/mpsuni_cs.o ************* spacer *********** linux:~ # modprobe eth0 1>> report 2>&1 ************* spacer *********** linux:~ # ifconfig -a 1>> report 2>&1 dummy0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.93.42 Bcast:192.168.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 eth0 Link encap:Ethernet HWaddr 00:10:B5:65:87:64 inet addr:192.168.93.42 Bcast:192.168.93.127 Mask:255.255.255.128 BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Base address:0x3000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ************* spacer *********** linux:~ # rcnetwork restart 1>> report 2>&1 Shutting down network device eth0[71G[32mdone[m Setting up network device eth0 SIOCSIFFLAGS: Resource temporarily unavailable [1A[71G[32mdone[m ************* spacer *********** linux:~ # cat /etc/modules.conf 1>> report 2>&1 # # # Copyright (c) 1996-2000 SuSE GmbH Nuernberg, Germany. All rights reserved. # # Author: Hubert Mantel <mantel@suse.de>, 1996-2000 # # Configuration file for loadable modules; used by modprobe and kerneld # # Aliases - specify your hardware alias eth1 off alias eth0 rtl8139 options rtl8139 alias tr0 off alias scsi_hostadapter off alias fb0 off # only used for Mylex or Compaq Raid as module alias block-major-48 off alias block-major-49 off alias block-major-72 off alias block-major-73 off # only needed for fifth and sixth IDE adaptor alias block-major-56 off alias block-major-57 off # mouse (for older busmice) alias char-major-10 off alias parport_lowlevel parport_pc options parport_pc io=0x378 irq=none,none # If you have multiple parallel ports, specify them this way: # options parport_pc io=0x378,0x278 irq=none,none # For parallel port devices, uncomment the following two lines and change # "frpw" to the protocol type you use # post-install paride insmod frpw # pre-remove paride rmmod frpw #***************************************************************************** # If you want to use the kernel sound drivers instead of OSS 3.8.1z (the # recommended solution) please put comment signs in front of the following # entries. Then choose one of the sample configurations below. Uncomment all # lines starting with 'alias', 'options' or 'pre-/post-install' within one # such configuration and modify the parameters according to your needs (e.g. # the ressources chosen for this device in /etc/isapnp.conf). For a lot of # ISA soundcards the Soundblaster driver is a good starting point. #***************************************************************************** alias char-major-14 off alias sound off alias midi off #***************************************************************************** # module : ad1816.o AD1816 chip # # Supported cards : # # Terratec Base 1/64 # HP Kayak # Acer FX-3D # SY-1816 # Highscreen Sound-Boostar 32 Wave 3D # Highscreen Sound-Boostar 16 # # Documentation available in /usr/src/linux/Documentation/sound/AD1816 # and in /usr/src/linux/drivers/sound/ad1816.c . # # Possible configuration : # # alias char-major-14 ad1816 # post-install ad1816 modprobe "-k" opl3 # post-install ad1816 modprobe "-k" mpu401 # options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000 # options opl3 io=0x0388 # options mpu401 io=0x0330 irq=9 # #***************************************************************************** # module : ad1848.o AD1848/CS4231/CS4248 Chip # --> Windows Sound System (MSS/WSS) # # A variety of common ISA soundcards are # compatible with this family of chips. # # Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search # for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS . # Usually this module is used in conjunction with other higher level sound # modules. # # Possible configuration for stand-alone usage : # # alias char-major-14 ad1848 # options ad1848 io=0x530 irq=7 dma=0 dma2=3 # #***************************************************************************** # module : cs4232.o Crystal 423x chipsets # # Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search # for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This # chip is often used together with other sound hardware. # # Possible configuration for stand-alone usage : # # alias char-major-14 cs4232 # post-install cs4232 modprobe "-k" opl3 # options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9 # options opl3 io=0x388 # #***************************************************************************** # module : es1370.o Ensoniq 1370 Chipsatz (--> PCI64/128) # # Supported cards : # # Creative Labs PCI64/128 # # Documentation availabke at /usr/src/linux/Documentation/sound/es1370 and # /usr/src/linux/drivers/sound/es1370.c . # # alias char-major-14 es1370 # options es1370 joystick=1 # #***************************************************************************** # module : es1371.o Creative Ensoniq 1371 Chipsatz (--> PCI64/128) # # Supported cards : # # Creative Labs PCI64/128 # # Documentation availabke at /usr/src/linux/Documentation/sound/es1371 and # /usr/src/linux/drivers/sound/es1371.c . # # alias char-major-14 es1371 # options es1371 joystick=0x200 # #***************************************************************************** # module : mad16.o MAD16 # # Possible configuration : # # alias char-major-14 mad16 # options sb mad16=1 # options mad16 io=0x530 irq=7 dma=0 dma16=1 # #***************************************************************************** # module : sb.o Soundblaster 16, SB Pro + Clones # Also needed for AWE32/64 # # Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster # and in /usr/src/linux/drivers/sound/sb.c . # # Possible configuration : # # alias char-major-14 sb # post-install sb /sbin/modprobe "-k" "adlib_card" # options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 # options adlib_card io=0x388 # #***************************************************************************** # module : trix.o MediaTrix AudioTrix Pro # # alias char-major-14 trix # pre-install trix modprobe "-k" # #***************************************************************************** # module : wavefront.o Turtle Beach Maui, Tropez, Tropez Plus # # Comment from /usr/src/linux/Documentation/sound/Wavefront : # (please read that file !) # "the wavefront options "io" and "irq" ***MUST*** match the "synthio" # and "synthirq" cs4232 options." # # Possible configuration : # # alias char-major-14 wavefront # alias synth0 wavefront # alias mixer0 cs4232 # alias audio0 cs4232 # pre-install wavefront modprobe "-k" "cs4232" # post-install wavefront modprobe "-k" "opl3" # options wavefront io=0x200 irq=9 # options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0 # options opl3 io=0x388 # #***************************************************************************** #***************************************************************************** # Example config for ALSA (for SB16 PnP - like cards) # You don't need to run isapnp with ALSA, it has full PnP support. # See /usr/doc/packages/alsa/README.SuSE #***************************************************************************** # #ALSA native device support: # # alias char-major-116 snd # options snd snd_major=116 snd_cards_limit=1 # #Insert your sound driver name here, and it you have a PCI or PnP card, #you are ready to do "rcsalsactl start": # # alias snd-card-0 snd-card-sb16 # ^^^^^^^^^^^^^ # options snd-card-sb16 snd_index=0 # ^^^^^^^^^^^^^ # #For a list of supported soundcards look into /usr/src/packages/alsa/cards.txt # #OSS/Free emulation # # alias char-major-14 soundcore # alias snd-slot-0 snd-card-0 # alias sound-service-0-0 snd-mixer-oss # alias sound-service-0-1 snd-seq-oss # alias sound-service-0-3 snd-pcm-oss # alias sound-service-0-8 snd-seq-oss # alias sound-service-0-12 snd-pcm-oss # #Set mixer to stored defaults (with alsactl store) # post-install snd alsactl restore # #***************************************************************************** ######################################################################## # Options; these are examples; uncommented and modify the lines you need ######################################################################## # options cdu31a cdu31a_port=0x340 cdu31a_irq=0 # options sbpcd sbpcd=0x230,1 # options aztcd aztcd=0x320 # options cm206 cm206=0x340,11 # options gscd gscd=0x340 # options mcd mcd=0x300,11 # options mcdx mcdx=0x300,11 # options optcd optcd=0x340 # options sjcd sjcd_base=0x340 # options sonycd535 sonycd535=0x340 # options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo # options ne io=0x300 irq=5 # Use this if you have two cards: # options ne io=0x300,0x320 irq=5,7 # options tulip options=0 # options 3c59x options=0 # options 3c501 io=0x280 irq=5 # options 3c503 io=0x280 irq=5 xcvr=0 # options 3c505 io=0x300 irq=10 # options 3c507 io=0x300 irq=10 # options 3c509 irq=10 # options at1700 io=0x260 irq=10 # options smc-ultra io=0x200 irq=10 # options wd io=0x300 irq=10 # options smc9194 io=0x200 irq=10 ifport=0 # options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0 # options depca io=0x200 irq=7 # options ewrk3 io=0x300 irq=10 # options eexpress io=0x300 irq=10 # options hp-plus io=0x300 irq=10 # options hp io=0x300 irq=10 # options hp100 hp100_port=0x380 # options apricot io=0x300 irq=10 # options ac3200 io=0x300 irq=10 mem=0xd0000 # options de620 io=0x378 irq=7 bnc=1 # options ibmtr io=0xa20 # options arcnet io=0x300 irq=10 shmem=0xd0000 # options plip io=0x378 irq=7 # options eepro io=0x260 irq=10 mem=0x6000 # options eth16i io=0x2a0 irq=10 # options fmv18x io=0x220 irq=10 # options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000 # options bttv card=2 # options tuner type=7 options dummy0 -o dummy0 options dummy1 -o dummy1 alias block-major-1 rd alias block-major-2 floppy alias block-major-3 off alias block-major-7 loop alias block-major-8 sd_mod alias block-major-11 sr_mod alias block-major-13 xd alias block-major-15 cdu31a alias block-major-16 gscd alias block-major-17 optcd alias block-major-18 sjcd alias block-major-20 mcdx alias block-major-22 off alias block-major-23 mcd alias block-major-24 sonycd535 alias block-major-25 sbpcd alias block-major-26 sbpcd alias block-major-27 sbpcd alias block-major-28 sbpcd alias block-major-29 aztcd alias block-major-32 cm206 alias block-major-33 off alias block-major-34 off # network block device alias block-major-43 off alias block-major-45 pd alias block-major-46 pcd alias block-major-47 pf alias char-major-4 serial alias char-major-5 serial alias char-major-6 lp alias char-major-9 st alias char-major-10-135 off alias char-major-10-175 agpgart alias char-major-10-240 agpgarti810 alias char-major-15 off alias char-major-19 cyclades alias char-major-20 cyclades alias char-major-21 sg alias char-major-27 ftape # fb alias char-major-29 off alias char-major-30 iBCS alias char-major-36 netlink_dev # alias char-major-43 hisax # alias char-major-44 hisax # alias char-major-45 hisax alias char-major-43 off alias char-major-44 off alias char-major-45 off alias char-major-48 riscom8 alias char-major-49 riscom8 alias char-major-67 coda alias char-major-75 specialix alias char-major-76 specialix alias char-major-81 bttv alias char-major-83 vtx options vtx quiet=1 alias char-major-89 i2c-dev alias char-major-96 pt alias char-major-97 pg alias char-major-107 3dfx alias char-major-108 ppp_async alias char-major-109 lvm # ppp over ethernet alias char-major-144 pppox # IrDA alias char-major-161 ircomm-tty # USB alias char-major-166 acm #alias char-major-180 usbcore alias char-major-240 usb-serial alias binfmt-332 iBCS alias binfmt-518 iBCS alias binfmt-204 binfmt_aout alias binfmt-263 binfmt_aout alias binfmt-264 binfmt_aout alias binfmt-267 binfmt_aout alias binfmt-0064 binfmt_aout alias binfmt-0008 binfmt_aout alias iso9660 isofs alias tty-ldisc-1 slip alias tty-ldisc-3 ppp alias tty-ldisc-5 mkiss # alias tty-ldisc-7 6pack alias tty-ldisc-7 off # IrDA alias tty-ldisc-11 irtty # alias ax0 mkiss alias ax0 off # alias sp0 6pack alias sp0 off alias slip0 slip alias sl0 slip alias slip1 slip alias sl1 slip alias ppp0 ppp alias ppp1 ppp alias plip0 plip alias plip1 plip alias ppp-compress-21 bsd_comp alias ppp-compress-26 ppp_deflate alias net-pf-3 ax25 # alias net-pf-3 off alias net-pf-4 ipx # alias net-pf-4 off alias net-pf-5 appletalk # alias net-pf-5 off alias net-pf-6 netrom # alias net-pf-6 off alias net-pf-10 ipv6 # alias net-pf-10 off alias net-pf-11 rose # alias net-pf-11 off alias net-pf-17 af_packet alias tap0 ethertap alias tap1 ethertap alias tap2 ethertap alias tap3 ethertap alias tap4 ethertap alias tap5 ethertap alias tap6 ethertap alias tap7 ethertap alias tap8 ethertap alias tap9 ethertap alias tap10 ethertap alias tap11 ethertap alias tap12 ethertap alias tap13 ethertap alias tap14 ethertap alias tap15 ethertap # Added by YaST2, do not change alias usb-hostadapter usb-uhci # End of YaST2 additions # YaST2: Accton Technology Corporation SMC2-1211TX # ALSA section {$#@begin@#$} [don't remove or move this line] vvvvv # # ALSA native device support, generated by YaST2 # alias char-major-116 snd options snd snd_major=116 snd_cards_limit=1 alias snd-card-0 nil options nil snd_index=0 snd_id=card1 # # OSS/Free emulation # alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss # # ALSA section {$#@_end_@#$} [don't remove or move this line] ^^^^^ <HR> <UL> <LI>application/octet-stream attachment: Report </UL> N§²æìržzǧué[h²ë )îÅ맲æìržzˬyÊ&ÚuØÚÊ&©Ý²Ç§ué[h²ë )îÅè^.±ç([(rØ^¶m§ÿðà .±ç(û.Š+·÷Ú