Purple Shirt wrote:
Hello,
Hi, I used this card at work before...
Now I implemented with direct kernel inclusion and it works but I got a couple errors while booting and I like to know how to fix those.
I attach the output here....
boot messages:
Sound initialization started Found OPL3-SAx (YMF719) <MS Sound System (CS4231)> at 0x534 irq 9 dma 0,1 <MPU-401 0.0 Midi interface #1> at 0x330 irq 9 dma 0 MSS: I/O port conflict <-error mpu401: I/O port 330 already in use <-error
Two different sound modules trying to use the same resources.....
<Yamaha OPL3> at 0x388 Sound initialization complete
<prompt>cat /dev/sndstat OSS/Free:3.8s2++-971130 Load type: Driver compiled into kernel Kernel: Linux shango 2.2.12 #2 SMP Sat Aug 28 07:01:37 EDT 1999 i586 Config options: 0
Installed drivers: Type 10: MS Sound System
a type of WSS/MSS
Type 27: Compaq Deskpro XL a type of WSS/MSS
Type 42: OPL3SA2 hmmm.... (sbpro maybe?)
Type 45: OPL3SA2 MSS a type of WSS/MSS
Type 43: OPL3SA2 MIDI Midi support
Type 88: AD1816 a type of WSS/MSS
Type 1: OPL-2/OPL-3 FM Adlib support
Type 5: Roland MPU-401 MPU401 support
Type 26: MPU-401 (UART) MPU401 Support
Type 37: Loopback MIDI Device Midi support
Card config: OPL3SA2 at 0x370 irq 9 drq 0,1 OPL3SA2 MSS at 0x530 irq 9 drq 0,1 OPL3SA2 MIDI at 0x330 irq 9 drq 0 (Compaq Deskpro XL at 0x530 irq 11 drq 3)
OPL3SA2 already has this device so how can another WSS/MSS use this as well? You have to choose which one you want to use and disable the other device/module. Basically you have too many devices/modules enabled. Only include devices/modules not already covered by the OPL3SA2 device/module. Or disable the OPL3SA2 module and configure each component separately, ie: WSS/MSS(only 1), Adlib, MPU401i(only 1), SB16. Know what I mean? <-error?
(Roland MPU-401 at 0x330 irq 9 drq 0) <-error?
Same applies here.....
OPL-2/OPL-3 FM at 0x388 drq 0 Loopback MIDI Device drq 0
=================== Aduanne Carter # Drow@Blazenet.net # =================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/