--------------003B7F434A7D09C78DD5D791 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bodo Bauer wrote:
Tom Schaefer wrote:
Some areas for you to fix:
1. When installing from CD 1, packages determined to be on CD 2 and 3 are not allowed to be installed during the first pass install. The friggin' installer just blows past the prompt and the user is not allowed to insert the other CDs.
There is some sort of bug that does not prompt for CD 2 or 3. I have found that if I insert the CD I want to install from, then run YAst, Yast seems to determine that there are a bunch of packages that weren't installed. DUH. Then, it seems to install them - but only the packages for the CD that is currently in the drive. This behavior is somewhat inconsistent, but predictable. Then, after installing packages from the second CD, I can exit Yast, remove the CD, then insert CD 3 and run Yast, who happens to "discover" that there are packages that weren't installed. The I can install them.
I thought you would have fixed this, as it was a problem in 5.0.
2. After the install "appears" to be done, leaving the user with a login prompt and no clue that you have a bunch of background processes running, and no idea of whether rebooting at this time is wise or not.
You get a message which tells you what's going on before the login prompt appears. It also tells you that you can watch the scripts running on console 9.
Yes, but the messages are meaningless and are not informative as to finish time, etc.The installer should not allow the user to anything which would jeopardize the install.
However, by probing around, I see the Yast installer is unpacking
MAN pages and all sorts of other stuff, unbeknownst to the user. You need to alert the installer that something else is happening.
It's generating a locate DB, a apropos DB, doublechecks the permissions, etc.
It shouldn't do the locate db stuff unless the user wants to. It adds quite a bit of time to wait for it to finish.
I have noticed that if you reboot too soon, Yast appears to be activated at boot up to either finish or do MORE stuff, which is not properly explained. So I never really know if everything has been installed properly.
If you install the system the very first time, you can't switch the CDs because your root filestystem is on CD1.
THEN EXPLAIN THIS DURING THE INSTALL.
That's why yast is started right after rebooting the system. It should now complete the installation and ask you for CD2 and or CD3 to get the missing packages installed.
NO IT DOES NOT ... Once you reboot the system, the installer may start, but there is nothing prompting me to insert Cd2, and since that is not explained - why would I be inserting CD2 or 3 after a reboot? SIMPLIFY! You can reboot and just use the machine how you see fit after the first reboot. Nothing is being explained on the console directly to the installer (user) that you are going to need CD 2 or 3. NEVER. What you fail to understand, that anyone that has previously used Solaris, Caldera, Slackware, or even Red Hat - you don't reboot the machine to finish the install. All packages are extracted, THEN the machine is configured and THEN you do a reboot. If you've mounted CD 1 as a filesystem, then you can UNMOUNT IT for CD 2 and 3. Sheeeeeeeeesh
This always worked for me, so I wonder about your problems... ?!
You are overfamiliar with your installer. SIMPLIFY SIMPLIFY SIMPLIFY Watch someone who has NEVER installed from your distribution. And don't coach them along the way. You'll see what I mean.
Then Yast starts some scripts like told above. If these scripts don't get enough time to finish (because of a reboot) the procedure starts again...
YES BUT THIS IS NOT EXPLAINED. The first time I installed your 5.0, I wrongly assumed the install was finished when in fact it was still completing as explained before. I wound up digging thru a bunch of the startup scripts and disabling the YAst startup - NOT EVEN KNOWING WHY YAST WAS STARTING - OR WHY IT HAD FAILED TO FINISH INITIALLY.
So look at console 9 (like the message tells you) before you reboot your system. If anything has finished processing
Needs to be more informative and specific. Hand your distribution to someone who has absolutely NO familiarty with your product and watch what they do. Turn off the updatedb and locatedb processes and alert the user that they do need to be run, and if they don't run them now, they'll be run in cron.daily or something. SIMPLIFY! You guys have a nice package - but you have over complicated a few things. Also, getting YAst to run without the CD is problematic at times when all I want to do is see which packages I have on the system, I can't unless I insert a CD. Fix that. I should be able to browse the package database without having to load a CD. Have a lot of fun! --------------003B7F434A7D09C78DD5D791 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit <HTML> Bodo Bauer wrote: <BLOCKQUOTE TYPE=CITE>Tom Schaefer wrote:
Some areas for you to fix:
1. When installing from CD 1, packages determined to be on CD 2 and
are not allowed to be installed during the first pass install. The friggin' installer just blows past the prompt and the user is not allowed to insert the other CDs.
There is some sort of bug that does not prompt for CD 2 or 3. I have found that if I insert the CD I want to install from, then run YAst, Yast seems to determine that there are a bunch of packages that weren't installed. DUH. Then, it seems to install them - but only the
for the CD that is currently in the drive. This behavior is somewhat inconsistent, but predictable. Then, after installing packages from
3 packages the
second CD, I can exit Yast, remove the CD, then insert CD 3 and run Yast, who happens to "discover" that there are packages that weren't installed. The I can install them.
I thought you would have fixed this, as it was a problem in 5.0.
2. After the install "appears" to be done, leaving the user with a login prompt and no clue that you have a bunch of background processes running, and no idea of whether rebooting at this time is wise or not.
You get a message which tells you what's going on before the login prompt appears. It also tells you that you can watch the scripts running on console 9. </BLOCKQUOTE> Yes, but the messages are meaningless and are not informative as to finish time, etc.The installer should not allow the user to anything which would jeopardize the install. <BLOCKQUOTE TYPE=CITE>
However, by probing around, I see the Yast installer is unpacking</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>> MAN pages and all sorts of other stuff, unbeknownst to the user.
You need to alert the installer that something else is happening.
It's generating a locate DB, a apropos DB, doublechecks the permissions, etc. </BLOCKQUOTE> It shouldn't do the locate db stuff unless the user wants to. It adds quite a bit of time to wait for it to finish. <BLOCKQUOTE TYPE=CITE>
I have noticed that if you reboot too soon, Yast appears to be activated at boot up to either finish or do MORE stuff, which is not properly explained. So I never really know if everything has been installed properly.
If you install the system the very first time, you can't switch the CDs because your root filestystem is on CD1.</BLOCKQUOTE> THEN EXPLAIN THIS DURING THE INSTALL. <BLOCKQUOTE TYPE=CITE>That's why yast is tarted right after rebooting the system. It should now complete the installation and ask you for CD2 and or CD3 to get the missing packages installed. </BLOCKQUOTE> NO IT DOES NOT ... Once you reboot the system, the installer may start, but there is nothing prompting me to insert Cd2, and since that is not explained - why would I be inserting CD2 or 3 after a reboot? SIMPLIFY! You can reboot and just use the machine how you see fit after the first reboot. Nothing is being explained on the console directly to the installer (user) that you are going to need CD 2 or 3. NEVER. What you fail to understand, that anyone that has previously used Solaris, Caldera, Slackware, or even Red Hat - you don't reboot the machine to finish the install. All packages are extracted, THEN the machine is configured and THEN you do a reboot. If you've mounted CD 1 as a filesystem, then you can UNMOUNT IT for CD 2 and 3. Sheeeeeeeeesh <BLOCKQUOTE TYPE=CITE> This always worked for me, so I wonder about your problems... ?! </BLOCKQUOTE> <B><FONT COLOR="#FF0000">You are overfamiliar with your installer. SIMPLIFY SIMPLIFY SIMPLIFY</FONT></B><B><FONT COLOR="#FF0000"></FONT></B> <B><FONT COLOR="#FF0000">Watch someone who has NEVER installed from your distribution. And don't coach them along the way.</FONT></B> You'll see what I mean. <BLOCKQUOTE TYPE=CITE> Then Yast starts some scripts like told above. If these scripts don't get enough time to finish (because of a reboot) the procedure starts again... </BLOCKQUOTE> YES BUT THIS IS NOT EXPLAINED. The first time I installed your 5.0, I wrongly assumed the install was finished when in fact it was still completing as explained before. I wound up digging thru a bunch of the startup scripts and disabling the YAst startup - NOT EVEN KNOWING WHY YAST WAS STARTING - OR WHY IT HAD FAILED TO FINISH INITIALLY. <BLOCKQUOTE TYPE=CITE> So look at console 9 (like the message tells you) before you reboot your system. If anything has finished processing</BLOCKQUOTE> Needs to be more informative and specific. Hand your distribution to someone who has absolutely NO familiarty with your product and watch what they do. Turn off the updatedb and locatedb processes and alert the user that they do need to be run, and if they don't run them now, they'll be run in cron.daily or something. SIMPLIFY! You guys have a nice package - but you have over complicated a few things. Also, getting YAst to run without the CD is problematic at times when all I want to do is see which packages I have on the system, I can't unless I insert a CD. Fix that. I should be able to browse the package database without having to load a CD. Have a lot of fun! </HTML> --------------003B7F434A7D09C78DD5D791-- -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e