BandiPat wrote:
On Saturday 19 August 2006 13:16, jim tate wrote:
I have a 56k modem that has run under Fedora and I want to setup in Suse10.1 Below is the info on the modem, is there a driver in Suse for this modem. This isn't a Windows modem , it is a Lucent "Venus" compatible modem that will run in Linux. Redhat9 and Fedora has drivers that would run it. I'm new to Suse and I don't know how to set it up in Suse. Also Suse doesn't have a "rc.local" file , if I build one will Suse read it at bootup, I have to put a setserial line in it.
Jim
00:0b.0 Communication controller: Agere Systems Venus Modem (V90, 56KFlex) Subsystem: Actiontec Electronics Inc Unknown device 0500 Flags: bus master, medium devsel, latency 0, IRQ 169 Memory at e1105000 (32-bit, non-prefetchable) [size=256] I/O ports at dc00 [size=256] I/O ports at e000 [size=256] I/O ports at e400 [size=8] Capabilities: [f8] Power Management version 2 ---------------------------------------------------------------------
Ok, Jim having this info in your mail to me might have helped in getting more info to you. Do you know how to use YaST2? That is an important part of getting things setup in SuSE easier than editing files as apparently Fedora required you to do. Actiontec modems have always worked nicely for me, so I suspect you'll have few problems.
Open YaST2 from your menu. It's listed as YAST under the System>Configuration>YaST heading. From there, go to Network Devices, where you'll find Modem. Select that, it will open, should find the modem and from there you configure the ISP and other settings for it. If indeed it's a hardware modem, there should be few if any problems, but again, don't forget to set the time out to zero to eliminate the connection from terminating early. Once that's done, KPPP & wvdial will be set to make your connection. An icon in your systray, bottom right, will appear for dialup but if not, just start kppp from the menu the first time.
Lee
I got the modem to connect with wvdial and firefox browses.. Can't get Kppp to connect, it can't open the modem at ttyS1, the settings in wvdial.conf and kppp are the same but it won't pick up modem. I can't find a dialer for the settings in Yast. Jim --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org