Chris Henderson wrote:
Tried with no luck:
1. remove insmod tg3 entry from boot.local and reboot 2. no eth0 or (ethN) found 3. edit /etc/udev/rules.d/70-persistent-net.rules and remove SUBSYSTEM=="net", DRIVERS=="?*", ATTR{address}=="00:11:23:f9:46:a7", NAME="eth0" 4. reboot and get error: no eth0 found (no network) 5. check the file (/etc/udev/rules.d/70-persistent-net.rules) again & it's empty (other than the commented out lines, of course) 6. load the network driver with insmod and the file is populated again with the same info. as before
Thanks for any other help on how to fix this.
Strange, What I would do next is Yast -> network -> network device, select and delete your NIC, then 'add' your NIC back (confirm proper module, etc.) and restart the network. No logic to it, but I have seen instances, where for lack of better words, the network card config gets 'corrupted?' despite showing the correct module and settings in yast, and deleting the card and then re-adding it seems to straighten the problem out. -- David C. Rankin, J.D.,P.E. Rankin Law Firm, PLLC 510 Ochiltree Street Nacogdoches, Texas 75961 Telephone: (936) 715-9333 Facsimile: (936) 715-9339 www.rankinlawfirm.com -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org