On Thu, 13 Apr 2006, Joe Morris (NTM) wrote:
Maura Edeweiss Monville wrote:
Here is the answer to your question:
mauede@linux:~> /sbin/route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 131.225.92.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 131.225.94.0 0.0.0.0 255.255.254.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 131.225.92.200 0.0.0.0 UG 0 0 0 eth0
OK, as I suspected, the gateway is setup by DHCP running on eth0. Is your ethernet also still plugged in?
It was not when I ried the wireless connection. Not it is ... in order to read my e-mail.
How and where (YAST ?) can I set both network adapters to STARTMODE=ifplugd (IIRC) ?
OK, go to Yast, Network Devices, Network Card, Hit Change in the section of Already Configured Devices, Click on your devices and the Edit, Go to Advanced, Detailed Settings, and choose Device Activation at Cable Connection. You can check by going to System, etc/sysconfig Editor, Hardware, Network, <adapter ID>, STARTMODE. Just this last weekend I reinstalled 9.3 on my daughter's laptop, and noticed the same. Even though ifplugd is not a listed choice, that was what her ethernet was set to, and I was wanting ifplugd to control both, and that fixed this exact problem for hers. HTH.
I will try. Thank you. Maura
-- Joe Morris Registered Linux user 231871
-- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com