Hello, I'm still trying to get XFree86 3.3.6 setup on my laptop under SuSE7.1. At the moment I have 4.02 working fine but SO5.2 isn't working so I thought that maybe things would work better under the previous version of X. However everytime I try to start SAX the X server fails. Below are copies of the ServerLog and StartLog. Does anyone have any ideas about what is happening and what I should do next. TIA, Jethro ServerLog: ================================================================= XFree86 Version 3.3.6 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 8 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.16-SMP i686 [ELF] SuSE Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, i810, i810-dc100, i810e, i815, smi, generic (using VT number 8) XF86Config: /var/X11R6/sax/config/StartConfig (**) stands for supplied, (--) stands for probed/default values Warning: The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/latin2/misc" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/latin7/75dpi" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/baekmuk" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/hellas/misc" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/hellas/75dpi" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/hellas/100dpi" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/hellas/Type1" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/xtest" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/local,/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/PEX,/usr/X11R6/lib/X11/fonts/latin2/75dpi,/usr/X11R6/lib/X11/fonts/latin2/100dpi,/usr/X11R6/lib/X11/fonts/latin2/Type1,/usr/X11R6/lib/X11/fonts/kwintv,/usr/X11R6/lib/X11/fonts/uni,/usr/X11R6/lib/X11/fonts/ucs/misc,/usr/X11R6/lib/X11/fonts/ucs/75dpi,/usr/X11R6/lib/X11/fonts/ucs/100dpi" Fatal server error: You must specify a keyboard in XF86Config When reporting a problem related to a server crash, please send the full server output, not just the last messages StartLog: ================================================================= SaX Start Terminal ------------------ Terminal: 1 Options ------- Option: --layout => Option: --force => Option: --out => Option: --model => Option: --auto => Option: --lang => Option: --options => Option: --gpm => Option: --vendor => Option: --server => Option: --chipset => Option: --ramdac => Option: --device => Option: --name => Option: --memory => Option: --rules => Option: --vsync => Option: --wm => Option: --hsync => Option: --prot => Startup Language ---------------- Language set to en ( saxrc ) Server ------ Alias name: SVGA Real file name: XF86_SVGA rc.config stuff --------------- Mouse Device: /dev/input/mice Mouse Protocol: PS/2 mouse settings via libhd ------------------------ Mouse Device: /dev/psaux Mouse Protocol: imps/2:/dev/input/mice ps/2 Temp directory -------------- make tmp dir /tmp/sax/ Mouse link ---------- make mouse link "ln -s /dev/psaux mouse" Display ------- Display is: :1 Server Setting -------------- start new XF86_SVGA server Application initialization failed: couldn't connect to display ":1" Error in startup script: invalid command name "winfo" while executing "winfo exists $newname" (procedure "Window" line 11) invoked from within "Window show ." (file "/var/X11R6/sax/bin/intro.tcl" line 311) Application initialization failed: couldn't connect to display ":1" Error in startup script: invalid command name "winfo" while executing "winfo exists $newname" (procedure "Window" line 11) invoked from within "Window show ." (file "/var/X11R6/sax/bin/mainsax.tcl" line 14620) while executing "exec $var(RunMainSax) $options -display $disp" invoked from within "if { ($pid == "") && ($OptionList(--force) != "startup") } { if { $OptionList(--out) != "off" } { puts "SaX: start new $RealServer server" } Wr..." (file "/var/X11R6/sax/bin/SaX.tcl" line 1324)