Hi guys, I am using three eMachines in a network. I have a problem configuring XWindows on one of these machines. The problem I get on this one machine is 1. When I select the SAX XWindows configuration tool, I see a column part of the screen continuously running from bottom to top. This column is on the right half of the screen and it is about 1/4 of the screen in width. I reaches from the bottom to the top. 2. Part of the SAX XWindows configuration windows does not fit on the screen. The button on the right that says "Next" is only partially visible. 3. When I use the autmotacially detected configuration (Mach64), and run it in test mode, the display becomes black, remains black, then there are intermittent flashes of the XWindows desktop. This same configuration works well on the other eMachines. 4. When I use the generic SVGA card selection, I get an image that remains stable. However, I have the same effect as under 1. and 2. Any ideas? TIA, Elan -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/