On my work PC I have an older ati x1650 graphics card running 2 Dell CRT monitors. This machine was running 11.2 just fine with the ati legacy drivers. after up grading to 11.3 for some other needs. I can't configure my monitors. In KDE personal settings it won't let me set the VGA higher than 800x600 at 60Hz and it defaults the Agp output to 1024X768 at 80 Hz anything that is saved here does not stick it reverts back to the low settings upon reboot. that I have tried using an old xconfig file( modified for the radeon driver), adding settings to the xconfig.d file, that hangs up the system at boot. Following some parts of the Ubuntu Wiki (Suse wiki no help at all) I can get my system configured to 1400x1050 @85Hz with side by side screens using xrandr commands so I know everything can work, but there is no way to make this permanent. I followed the Wiki to try and put these commands into my .Xprofile, or /etc/kde4/kdm/Xsetup, but these files do not exist and adding them hangs up my system. I would try my old ati drivers, but I have been told they are not compatible with the newer kernel. So where do I go from here ? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org