Hello Rik, Thank's for Helping Me find this things, I owe you a lot.. But.. Friday, May 26, 2000, 4:06:24 PM, you wrote: RD> type.. RD> setserial /dev/ttyS15 it's something like /dev/ttyS15 uart: not defined io=<forget> irq 11 I tried to use #setserial /dev/ttyS15 uart <standar uart for internal modem/ I'm forget>. and use wvdial, before it modem not responding after it modem not responding Maybe uart was wrong, what uart is to my modem ? RD> what's the output? RD> Is it possible that something else is sharing the interrupt, even though it RD> it's not in use? No, I use other OS to find more clearly to INT (Like SiSoft Sandra) All Hardware has no conflict/sharing interrupt RD> You say your using ttyS0 for a mouse. Is there any chance of moving to a RD> PS/2 mouse? These can be picked up very cheaply these days. The reason I I have turn off for a while, but still can't He he.. I think I know one more..Problem.!! Look at this Please In $Mic$$$ W$NDOZe COM1 is real for Serial device (now for Mouse) .. COM2 is virtual ...this from Driver MODEM, ..I just have Real COM1 dan LPT1 ..No more. Now in LINUX environment ttyS0 (COM1) is for Mouse ttyS1 (COM2) is for ..? I don't know where it's come from, It's actually what ? I don't have such device COM2..Why. Maybe ttyS1 conflict with my winmodem..ttyS15 !! So how to turn off ttyS1 ? (not in BIOS, Theren't no setting for This).. RD> I used to have a winmodem that just refused to work, unless I removed COM1 RD> from the BIOS. Moving the serial port to COM3 in the BIOS worked, but only RD> after I got the modem to come up properly. He ..Com1 and Com3 shared..!! Com2 and COm3 shared too, So just one device can be used if shared..isn't ? RD> So on that note, maybe it might be worth disabling the serial ports in your RD> BIOS, and while your there check that the PnP is controlled by the BIOS and RD> not the OS. Then boot into console mode (since you'll have no mouse), and RD> see if you can get it working now. (try wvdial rather than kppp so that you RD> don't need to run X-windows). I have disable it for a while but still can't thank's for wvdial, I know one more command now. RD> Good luck, -- Best regards, Syeh mailto:A3@Telkom.net -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/