Hey there James you must first make sure that your other hard drive jumpered to master and then you should be able to set the other as ds standig for "Device Slave". -----Original Message----- From: James (Jim) Hatridge [mailto:hatridge@straubing.baynet.de] Sent: 30 May 2000 13:02 To: suse-linux-e@suse.com Subject: [SLE] HD Question HI All,,, I was given a digital 245mb HD. I can only get it to work as the slave unit. I would like to use it as the master. On the bottom is three jumpers sp ds cs. When all three are open then it will work as ths slave unit. I tryed jumping each single and it would not work at all. Can anyone tell me how to set the jumpers as master? TIA! Jim Hatridge hatridge@straubing.baynet.de Proud Linux User #88484 ------------------------------------------------------------------------ Jim's Beowulf Project Looking for giveaway computers and parts I need it all! Email Jim for details on how you can help build a poor man's super computer. -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ ********************************************************************** This e-mail and any attachment contains information which is private and confidential and is intended for the addressee only. If you are not an addressee, you are not authorised to read, copy or use the e-mail or any attachment. If you have received this e-mail in error, please notify the sender by return e-mail and then destroy it. ********************************************************************** -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/