Le 02/02/2014 23:06, Freek de Kruijf a écrit :
Op zondag 2 februari 2014 16:28:21 schreef jdd:
I used Dolphin, which means it is mounted like above.
ok
The fact that the device is write-protected, is the problem. The SD card is not write protected.
when I insert a write protected card I get in dmesg: [ 1365.057433] sd 8:0:0:0: [sdf] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB) [ 1365.058534] sd 8:0:0:0: [sdf] Write Protect is on [ 1365.058537] sd 8:0:0:0: [sdf] Mode Sense: 03 00 80 00 [ 1365.059521] sd 8:0:0:0: [sdf] No Caching mode page found [ 1365.059524] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 1365.062268] sd 8:0:0:0: [sdf] No Caching mode page found [ 1365.062270] sd 8:0:0:0: [sdf] Assuming drive cache: write through [ 1365.075964] sdf: sdf1 So how can I make the device /dev/sde3 not write-protected or rather /dev/sde when I use dd to write an image to the device. did you try an other card? just in case it's the reader that have a problem? some are mechanics, some are optics and may be can be dusty?
It has never been used on a Windows machine. The SD card is used to boot from by a Raspberry Pi.
is there a format option in the rapsberry or is it completely empty?
No. The problem is that somehow the device is defined as read-only. Maybe something in udev that does that.
most real problems are hardware related. I would try usb flash disk or external card reader you can also boot a live system and see if it's better, and if yes, try an other user created for this purpose jdd -- http://www.dodin.org -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org