On Mon, Feb 24, 2020 at 7:01 PM Paul Neuwirth <mail@paul-neuwirth.nl> wrote:
I now changed cabling as follows:
HBA Port 1 2 | | Shelf Contr 1 IN OUT | | | Shelf Contr 2 IN OUT | |________/
now each hard disk is shown 4 times.
Unfortunately it is garbled but it seems you interconnected both IO modules. This is wrong. You are supposed to see exactly 2 paths to each disk. You should connect HBA ports to IN ports on IO modules. Do not interconnect IO modules themselves.
as each of the two ports are connected to both controllers.
# lsscsi [... local hdds on host 0 and 1 ...] [2:0:0:0] enclosu XYRATEX RS-1402-SA-XNS1 3034 - [2:0:1:0] enclosu XYRATEX RS-1402-SA-XNS1 3034 - [2:0:2:0] disk XYRATEX RS-1402-SA-XNSSX /dev/sdai [2:0:3:0] disk XYRATEX RS-1402-SA-XNSSX /dev/sdd [2:0:4:0] disk ST4000NM 0033-9ZM170 SX GA06 /dev/sde
Yes, that looks like SATA disk. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org