Hello Michael. Sounds similar to my issue with 10.1 - drive unrecognised. Same with 10.2 IIRC ASUS P5K motherboard has onboard Jmicron chip. I could not get 10.1 to install. As it happened Ubuntu (7.0.4??) installed fine and I was content for a while. When 10.3 openSuSE came out I tried again. Bingo - success. In my case it gets more interesting... I have four SATA drives, one system drive at 80 gig and three data drives in software RAID5 at 320 gig each. The only way I could get things to work - tried a lot of BIOS settings, too! - was to set the system drive to be on SATA port 4 (/dev/sdd) and then the magic happened. By the way, you may profit from upgrading the motherboard BIOS. Mine was 0302 and I had very strange CPU core temperature readings - 40 degrees idle, 60 degrees running gklxgears. Upgraded to the latest no-Beta BIOS (0704) and that problem has gone away. Mind you the drive setup is a bit different between 0302 and 0704. Also be warned - you cannot regress at least not from 0704 to 0302. Your mileage may vary :-) HTH, Denis At 12:13 PM 29/11/2007, Michael Fischer wrote:
New machine:
Asus M2N-VM mobo (NVIDIA GeForce 6100 chipset) 2 WD800JD 80G SATA2 PIONEER DVD-RW SATA
SuSE 10.1 (10.3 on the way, but I wanted to test the box)
This thing has 4 SATA slots on the mobo. Near as I can figure it the order (when looking in the box at the board looks like
2 3
1 4
by experimentation with cables and what the BIOS says.
All drives are recognized by the BIOS.
Here's the problems:
Only with the DVD-RW in slot 1 can SuSE figure out that the installation media is present (c.f. http://en.opensuse.org/SDB:CD_not_found_problem) but it *is* an SATA drive, one which works fine for installation in the machine on which I am typing this email.
With the DVD-RW in slot 1, Installation begins, but the installer says it can't find any hard drives.
Kernel messages show
ata2: SATA link down (SStatus 0)
Install with "Safe Settings" didn't help.
Google shows various people having similar issues, but seemingly with different motherboards. Not sure if there's a driver which needs to be loaded or what.
Following url has decent-looking specs of this motherboard:
http://www10.uk.shopping.com/xPF-ASUS-ASUS-M2N-VM-DH-mainboard-micro-ATX-nFo...
Does SATA2 put me in trouble here?
Thanks in advance.
Michael -- Michael Fischer michael@visv.net -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org
-- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org