Hey Groups; Has anyone gotten a Palm Zire with a USB connector to work with SuSE 9.0? I have had all of this working with SuSE 8.2. Using "lsusb" it shows up with a Palm device after hitting hot sync. Call up Jpilot and/or kjpilot and neither can find the device. I have even downloaded and compiled Jpilot's most recent version (which worked under SuSE 8.2 just fine) with no luck under 9.0. My USB 1.0 HP scanner works - Yast2 found it and set it up. This make me believe that SuSE has screwed around with something which will not allow use off the USB port. I have kernel 2.4.22 with the correct USB chipset and devices selected. Besides they are found in /proc and "lsusb". And acpi=off The error is: **************************************** Syncing on device /dev/usb/ttyUSB1 Press the HotSync button now **************************************** pi_bind Invalid argument Check your serial port and settings Exiting with status SYNC_ERROR_BIND Finished Device: crw-rw---- 1 root uucp 188, 1 2003-09-23 13:01 ttyUSB1 Any clues as where to look? -- 73 de Donn Washburn __ " http://www.hal-pc.org/~n5xwb " Ham Callsign N5XWB / / __ __ __ __ __ __ __ 307 Savoy St. / /__ / / / \/ / / /_/ / \ \/ / Sugar Land, TX 77478 /_____/ /_/ /_/\__/ /_____/ /_/\_\ LL# 1.281.242.3256 a MSDOS Virus "Free Zone" OS Email: n5xwb@hal-pc.org " http://counter.li.org " #279316