On 24/02/2020 11:57, jdd@dodin.org wrote:
Le 24/02/2020 à 11:51, gumb a écrit :
The print queue in either cups interface or the Plasma printer applet shows all these attempts as 'completed' jobs, and the printer status as 'ready'. But there's no actual communication.
did you try to ping the printer? print with lpr to see if there is a message? what dmesg say? logs?
I can ping the printer: ping 192.168.0.57 PING 192.168.0.57 (192.168.0.57) 56(84) bytes of data. 64 bytes from 192.168.0.57: icmp_seq=1 ttl=255 time=234 ms 64 bytes from 192.168.0.57: icmp_seq=2 ttl=255 time=216 ms 64 bytes from 192.168.0.57: icmp_seq=3 ttl=255 time=198 ms 64 bytes from 192.168.0.57: icmp_seq=4 ttl=255 time=180 ms 64 bytes from 192.168.0.57: icmp_seq=5 ttl=255 time=161 ms ^C --- 192.168.0.57 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 161.932/198.043/234.167/25.514 ms I don't know what you mean by print with lpr. I've already posted cups logs elsewhere on this thread and dmesg doesn't show anything related. I've just tried changing the protocol in the CUPS interface, to http and then the HP/JetDirect you mentioned elsewhere, specifying socket://192.168.0.57:9100 (I don't know where this 9100 comes from but I see it mentioned everywhere - does it require entering in the firewall config?). I found this FAQ on the Brother website: https://www.brother.fr/services-et-supports/dcp-j572dw/faqs/how-to-trouble-s... and I followed it through but it's always the same. I try printing a test page from the CUPS interface, the print job shows as processing and after a few seconds disappears as though all is well, but there's nothing actually being sent to the printer. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org