On Fri, 2005-01-28 at 02:16, Cassou, Ronald M wrote:
Hi Gustav,
Thanks for the advice. I booted with "init 3" and tried to run SaX2 - all I get is a white screen. I found the file /var/log/SaX.log and looked to see what had been setup. I am wondering if the problem is do to a difference betweeen digital and analog modes for the TFT/LCD. It seems that the "preferred" mode is digital (300mm x 230 mm) which is different than the analog mode (305mm x 228mm). I think that the system boots in "analog" mode, which is why I can see all the text. I think that SaX2 is trying to use the digital mode. I also see that SaX2 does not like the DDC modes returned by the monitor. The log file does give me a 1400x1050 analog mode that might work if I modify XF86Config. I have to investigate this further.
Did you try the flags on sax2 in init 3 that david krider suggested? "I've had some luck playing with the flags on sax2, specifically `-a' and`-l'. I use the former to get a "base" xorg.conf file, which I can modify by hand." Gustav