I am running 6.4 and recently added a SoundBlaster 16 (Actually it is a SB16-SCSI2, but I'm not going to use the SCSI port). It seems that this and my NIC (a 3C509B) share the same IRQ (5). On a Win98 partition this was easy to work around by setting the IRQ for the SB to 7 from autoexec.bat, however it looks like it's not a persistent change (so when I reboot in Linux the IRQ is 5 again, causing a conflict). How can I configure this properly in Linux? I'd prefer to get the SB16 working and change it's IRQ to 7 rather than the NIC (so that it's the same setup as the Win98 boot). YAST2 is puking when I put in these settings (though I may very well be doing something wrong). I'd prefer to modify the configuration files directly though for the sound card (rather than using a setup-program) so I can further my understanding of Linux's guts and settings. Any suggestions or places to look for help? -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq