-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, some time ago, I removed pulseaudio because it didn't let me use my soundcard in analog/full duplex mode. Now I reinstalled it for testing and, well, full duplex works but I have some other issues. First of all, I don't see any device list in Phonon. Normally, there should be a list of devices to priorize. But it looks like this: http://i84.photobucket.com/albums/k26/sgofferj/screenshot10.png I would like to have the priority list back... :) Then I would like to know how I can make specific devices use specific outputs. I use the Flightgear flightsim and with it comes a voice com program, fgcom. It does accept parameters for input/output device and has a list option. However, the list option only shows "default" for in and for out. Ideally, I would like fgcom to use the front mic/front headset while the general sound goes through the 7.1 rear connectors. Any hints, anyone? - -S - -- Infos --------------------------------------------------------------------- enterprise:~ # hwinfo --sound 19: PCI 14.2: 0403 Audio device [Created at pci.319] Unique ID: 5Dex.DTwrdue_pn8 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x841b Revision: 0x40 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfcff4000-0xfcff7fff (rw,non-prefetchable) IRQ: 16 (7845 events) Module Alias: "pci:v00001002d00004383sv00001043sd0000841Bbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown 31: PCI 100.1: 0403 Audio device [Created at pci.319] Unique ID: NXNs.y1jILTvHrVC Parent ID: _Znp.UAx368lzOkB SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.1 SysFS BusID: 0000:01:00.1 Hardware Class: sound Model: "nVidia Audio device" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0e08 SubVendor: pci 0x1462 "Micro-Star International Co., Ltd." SubDevice: pci 0x2630 Revision: 0xa1 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfea7c000-0xfea7ffff (rw,non-prefetchable) IRQ: 19 (72133 events) Module Alias: "pci:v000010DEd00000E08sv00001462sd00002630bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=yes, avail=yes, need=no, active=unknown Attached to: #10 (PCI bridge) enterprise:~ # aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 - -- (o_ Stefan Gofferje | SCLT, MCP, CCSA //\ Reg'd Linux User #247167 | VCP #2263 V_/_ Heckler & Koch - the original point and click interface 04:52am up 0:51, 4 users, load average: 0.44, 0.22, 0.19 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEARECAAYFAk8soRAACgkQbQKZlCdPOMO+JwCgr4zxTI5hFwNBebiAM7gxdfpY lIoAoJDsHhzYuWXbvrhTDdVdx1I8qtoG =U+pc -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org