![](https://seccdn.libravatar.org/avatar/f9a9cf77af20d925b328ee8c95c0068c.jpg?s=120&d=mm&r=g)
Moby wrote:
I have had a system running fine since oss 10.1 (upgraded from there on to the current nightmare that is 11.1).
Here is the system disk layout:
Two 300 GB SATA hard drives - sda and sdba sda1 and sdb1 are 130 MG, them mirrored using md raid into /dev/md0. /dev/md0 has ext3 mounted as /boot. sda2 and sdb2 are 1 GB, then mirrored using md raid into /dev/md1. /dev/md1 is swap. sda3 and sdb3 are 274 GB, then mirrored using md raid into /dev/md2. /dev/md2 has lvm on it, with / being /dev/system/system. Grub installed in mbr of sda.
This system has been running great. I upgraded in-place from 11.0 to 11.1, and everything was still fine. Then I built a custom kernel (as I have done with all other versions - the only thing I change is set the processor type). During the custom kernel install phase, make modules_install worked fine, but I noticed some weird device-mapper "no such file or device" error message during make install. I did not think much of it (probably a BIG mistake). Verified new vmlinuz and initrd were in place and /boot/grub/menu.lst looked kosher. Rebooted the system, and it went to pot.
https://bugzilla.novell.com/show_bug.cgi?id=463451 JR -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org