Roger Oberholtzer wrote / napísal(a):
On openSUSE 10.2, if I run "hwinfo --gfxcard", I get:
26: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_10de_141 Unique ID: VCu0.M9cbAH2MFA0 Parent ID: vSkL.76Y+ZaqIO10 SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "ASUSTeK GeForce 6600" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0141 "GeForce 6600" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x8199 Revision: 0xa2 Memory Range: 0xf4000000-0xf7ffffff (rw,non-prefetchable) Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable) Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable) Memory Range: 0xf8000000-0xf801ffff (ro,prefetchable,disabled) IRQ: 5 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000141sv00001043sd00008199bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Config Status: cfg=yes, avail=yes, need=yes, active=unknown Attached to: #12 (PCI bridge)
My question is why there is a "Driver Info #0" as well as a "Driver Info #1" entry.
My xorg.conf contains:
Section "Device" BoardName "GeForce 6600" BusID "1:0:0" Driver "nv" Identifier "Device[0]" Option "XaaNoOffScreenPixmaps" "on" Option "XaaNoPixmapCache" "on" Screen 0 VendorName "NVidia" EndSection
So I expect the #0 entry. I do not expect the #1 entry. I would have expected it to be an either/or thing, but not both drivers.
There should be both of them. What you're missing are sections "Driver Status" (active/not active) Can you fill bugreport for that? -- Best Regards, Michal Zugec Software developer --------------------------------------------------------------------- SuSE CR, s.r.o. e-mail: mzugec@suse.cz Lihovarska 1060/12 tel: +420 284 028 960 190 00 Praha 9 fax: +420 296 542 374 Czech Republic http://www.suse.cz/ -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org