Hello,
After a recent installation of an OpenSuSE 12.4, i have some problems with vacation.
I have configured vacation like this:
/home/claudio # cat .forward \claudio, "|/usr/bin/vacation -t0 -r claudio"
/home/claudio # cat .vacation.msg Subject: assente
Sono assente
/home/claudio # vacation -I claudio
/home/claudio # ls -la total 68 drwxr-xr-x 7 claudio users 4096 Dec 15 17:26 . drwxr-xr-x 7 root root 4096 Dec 16 09:52 .. -rw------- 1 claudio users 0 Dec 15 15:25 .bash_history -rw-r--r-- 1 claudio users 1177 Dec 15 15:25 .bashrc drwx------ 2 claudio users 4096 Dec 15 15:25 .config -rw-r--r-- 1 claudio users 1637 Dec 15 15:25 .emacs drwxr-xr-x 2 claudio users 4096 Dec 15 15:25 .fonts -rw-r--r-- 1 claudio users 46 Dec 15 16:46 .forward -rw-r--r-- 1 claudio users 861 Dec 15 15:25 .inputrc drwx------ 2 claudio users 4096 Dec 15 15:25 .local -rw-r--r-- 1 claudio users 1028 Dec 15 15:25 .profile -rw-r--r-- 1 claudio users 12288 Dec 16 09:57 .vacation.db -rw-r--r-- 1 claudio users 31 Dec 15 16:42 .vacation.msg -rw-r--r-- 1 claudio users 1002 Dec 15 15:25 .vimrc drwxr-xr-x 6 claudio users 4096 Dec 15 16:06 Maildir drwxr-xr-x 2 claudio users 4096 Dec 15 15:25 bin
Then i try to test the vacation:
telnet localhost 25 Trying ::1... telnet: connect to address ::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 mail.xxx.it ESMTP Postfix helo mail 250 mail.xxx.it mail from: claudio.prono@atpss.net 250 2.1.0 Ok rcpt to: claudio@xxx.it 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> Subject: mail di prova
test . 250 2.0.0 Ok: queued as 65AD81226D5 quit 221 2.0.0 Bye Connection closed by foreign host.
Into mail.info i have this:
Dec 16 09:58:35 mail01 postfix/smtpd[21704]: connect from localhost[127.0.0.1] Dec 16 09:58:52 mail01 postfix/smtpd[21704]: 65AD81226D5: client=localhost[127.0.0.1] Dec 16 09:59:01 mail01 postfix/cleanup[21736]: 65AD81226D5: message-id=<20111216085852.65AD81226D5@mail.xxxx.it> Dec 16 09:59:01 mail01 postfix/qmgr[3501]: 65AD81226D5: from=<claudio.prono@atpss.net>, size=327, nrcpt=1 (queue active) Dec 16 09:59:02 mail01 postfix/smtpd[21704]: disconnect from localhost[127.0.0.1] Dec 16 09:59:02 mail01 spamd[2653]: spamd: connection from localhost [127.0.0.1] at port 46675 Dec 16 09:59:04 mail01 spamd[2653]: spamd: setuid to nobody succeeded Dec 16 09:59:06 mail01 spamd[2653]: spamd: processing message <20111216085852.65AD81226D5@mail.xxx.it> for nobody:65534 Dec 16 09:59:14 mail01 spamd[2653]: spamd: clean message (-0.1/5.0) for nobody:65534 in 12.0 seconds, 318 bytes. Dec 16 09:59:14 mail01 spamd[2653]: spamd: result: . 0 - ALL_TRUSTED,MISSING_HEADERS scantime=12.0,size=318,user=nobody,uid=65534,required_score=5.0,rhost=localhost,raddr=127.0.0.1,rport=46675,mid=<20111216085852.65AD81226D5@mail.xxx.it>,autolearn=no Dec 16 09:59:14 mail01 postfix/pickup[20911]: 7E1FD122770: uid=65534 from=<claudio.prono@atpss.net> Dec 16 09:59:14 mail01 postfix/cleanup[21736]: 7E1FD122770: message-id=<20111216085852.65AD81226D5@mail.xxx.it> Dec 16 09:59:14 mail01 postfix/pipe[21737]: 65AD81226D5: to=<claudio@xxx.it>, relay=spamassassin, delay=30, delays=17/0.04/0/13, dsn=2.0.0, status=sent (delivered via spamassassin service) Dec 16 09:59:14 mail01 postfix/qmgr[3501]: 65AD81226D5: removed Dec 16 09:59:14 mail01 postfix/qmgr[3501]: 7E1FD122770: from=<claudio.prono@atpss.net>, size=639, nrcpt=1 (queue active) Dec 16 09:59:14 mail01 postfix/local[21742]: 7E1FD122770: to=<claudio@xxx.it>, relay=local, delay=0.24, delays=0.04/0.09/0/0.11, dsn=2.0.0, status=sent (delivered to maildir) Dec 16 09:59:14 mail01 postfix/local[21742]: 7E1FD122770: to=<claudio@xxx.it>, relay=local, delay=0.29, delays=0.04/0.09/0/0.17, dsn=2.0.0, status=sent (delivered to command: /usr/bin/vacation -t0 -r claudio) Dec 16 09:59:14 mail01 postfix/qmgr[3501]: 7E1FD122770: removed Dec 16 09:59:15 mail01 spamd[2652]: prefork: child states: II
But on vacation message was recieved.
So i try to strace the vacation, with a command like this:
/home/claudio/Maildir/new # cat 1324025954.V803I18001eM616308.mail01 | strace /usr/bin/vacation -t0 -r claudio
execve("/usr/bin/vacation", ["/usr/bin/vacation", "-t0", "-r", "claudio"], [/* 47 vars */]) = 0 brk(0) = 0x804e000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7881000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=25174, ...}) = 0 mmap2(NULL, 25174, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb787a000 close(3) = 0 open("/usr/lib/libgdbm.so.3", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 \20\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=22100, ...}) = 0 mmap2(NULL, 24776, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7873000 mmap2(0xb7878000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4) = 0xb7878000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\221\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1682149, ...}) = 0 mmap2(NULL, 1489384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7707000 mprotect(0xb786c000, 4096, PROT_NONE) = 0 mmap2(0xb786d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x165) = 0xb786d000 mmap2(0xb7870000, 10728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7870000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7706000 set_thread_area({entry_number:-1 -> 6, base_addr:0xb77066c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 mprotect(0xb786d000, 8192, PROT_READ) = 0 mprotect(0xb7878000, 4096, PROT_READ) = 0 mprotect(0x804c000, 4096, PROT_READ) = 0 mprotect(0xb78a1000, 4096, PROT_READ) = 0 munmap(0xb787a000, 25174) = 0 brk(0) = 0x804e000 brk(0x806f000) = 0x806f000 socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 3 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = 0 send(3, "\2\0\0\0\v\0\0\0\7\0\0\0passwd\0", 19, MSG_NOSIGNAL) = 19 poll([{fd=3, events=POLLIN|POLLERR|POLLHUP}], 1, 5000) = 1 ([{fd=3, revents=POLLIN|POLLHUP}]) recvmsg(3, {msg_name(0)=NULL, msg_iov(2)=[{"\243C\203\267\240*\212", 7}, {")\212\4\10\r\6\201\267", 8}], msg_controllen=0, msg_flags=MSG_CMSG_CLOEXEC}, MSG_CMSG_CLOEXEC) = 0 close(3) = 0 socket(PF_FILE, SOCK_STREAM|SOCK_CLOEXEC|SOCK_NONBLOCK, 0) = 3 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = 0 send(3, "\2\0\0\0\0\0\0\0\10\0\0\0claudio\0", 20, MSG_NOSIGNAL) = 20 poll([{fd=3, events=POLLIN|POLLERR|POLLHUP}], 1, 5000) = 1 ([{fd=3, revents=POLLIN|POLLHUP}]) read(3, "\2\0\0\0\1\0\0\0\10\0\0\0\2\0\0\0\351\3\0\0d\0\0\0\16\0\0\0\16\0\0\0"..., 36) = 36 read(3, "claudio\0x\0claudio.prono\0/home/cl"..., 49) = 49 close(3) = 0 chdir("/home/claudio") = 0 open(".vacation.db", O_RDWR) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=12322, ...}) = 0 fcntl64(3, F_SETLK, {type=F_WRLCK, whence=SEEK_SET, start=0, len=0}) = 0 read(3, "\316\232W\23\0\20\0\0\0\20\0\0\0\20\0\0\n\0\0\0\0\20\0\0\311\0\0\0\0@\0\0"..., 52) = 52 read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4044) = 4044 lseek(3, 4096, SEEK_SET) = 4096 read(3, "\0 \0\0\0 \0\0\0 \0\0\0 \0\0\0 \0\0\0 \0\0\0 \0\0\0 \0\0"..., 4096) = 4096 brk(0x8090000) = 0x8090000 brk(0x80b1000) = 0x80b1000 brk(0x80d2000) = 0x80d2000 lseek(3, 8192, SEEK_SET) = 8192 read(3, "\1\0\0\0\336\17\0\0\"0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 lseek(3, 12288, SEEK_SET) = 12288 read(3, "__VACATION__INTERVAL__TIMER__\0\0\0"..., 34) = 34 lseek(3, 12288, SEEK_SET) = 12288 write(3, "__VACATION__INTERVAL__TIMER__\0", 30) = 30 write(3, "\0\0\0\0", 4) = 4 lseek(3, 8192, SEEK_SET) = 8192 write(3, "\1\0\0\0\336\17\0\0\"0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096 fstat64(0, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7880000 read(0, "Return-Path: <claudio.prono@atps"..., 4096) = 726 read(0, "", 4096) = 0 fsync(3) = 0 fcntl64(3, F_SETLK, {type=F_UNLCK, whence=SEEK_SET, start=0, len=0}) = 0 close(3) = 0 exit_group(0) = ?
As i can see, the vacation reads the first line of the message, then exit...but i don't know why....
Any suggestion about this?
Cordially,
Claudio Prono.
As my previous E-Mail, i can now confirm Vacation on OpenSuSE 12.1 don't works, or maybe there is something not clear to me..... No Vacation mail
Il 16/12/2011 10.07, Claudio Prono ha scritto: produced at all... -- -------------------------------------------------------------------------------- Claudio Prono OPST System Developer Gsm: +39-349-54.33.258 @PSS Srl Tel: +39-011-32.72.100 Via Santorelli, 15 Fax: +39-011-32.46.497 10095 Grugliasco (TO) ITALY http://atpss.net/disclaimer -------------------------------------------------------------------------------- PGP Key - http://keys.atpss.net/c_prono.asc -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org