Suse 9.3. I'm trying to get an A-Data PD9 512 Flash drive to work so far without success. lsusb lists the drive (though it calls it a feiya drive) The relevant entry in /proc/bus/usb/devices says T: Bus=04 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=090c ProdID=1000 Rev=11.00 S: Manufacturer=USB 2.0 S: Product=Flash Disk S: SerialNumber=AB00000000004505 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us lsmod shows the scsi module installed: usb_storage 63936 0 scsi_mod 125384 5 usb_storage,sg,st,sr_mod,sd_mod But when I try to mount it as /dev/sda or /dev/sdb (as the manual says) I get a "No media found" message. What am I doing wrong? Regards, -- Jos van Kan registered Linux user #152704 -- Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help@suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq@suse.com