My system has a Stealth Pro with an old Zenith Flatscreen VGA. I've got fvwm2 going ant trying to switch to fvwm95. I have loaded fvwm95 with Yast. when I use "startx fvwm95" i get the following .X.err file. What am I missing? Jim Begin .x.err XFree86 Version 3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 4 1997 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see <A HREF="http://www.XFree86.Org/FAQ"><A HREF="http://www.XFree86.Org/FAQ</A">http://www.XFree86.Org/FAQ) Operating System: Linux 2.0.32 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200 (**) S3: Graphics device ID: "Primary Card" (**) S3: Monitor ID: "Primary Monitor" Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/Speedo" does not exist. Entry deleted from font path. Warning: The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unsca led,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi" (--) S3: chipset: 928, rev E or above (--) S3: chipset driver: mmio_928 (--) S3: card type: ISA (--) S3: Diamond Stealth BIOS found (--) S3: videoram: 2048k (--) S3: Ramdac type: ss2410 (--) S3: Ramdac speed: 110 MHz (**) S3: Using ICD2061A programmable clock (--) S3: Maximum allowed dot-clock: 110.000 MHz (**) S3: Mode "640x480": mode clock = 25.180 (--) S3: Using 6 bits per RGB value (--) S3: Virtual resolution set to 640x480 (--) S3: Using a banksize of 64k, line width of 640 (--) S3: Using a single 64x64 area at (576,482) for expanding pixmaps (--) S3: Using 8 planes of 640x2730 at (0,546) aligned 8 as font cache FvwmTalk: dead pipe [FVWM][Done]: <<ERROR>> Call of 'fvwm2-95' failed!!!! (restarting 'fvwm2' instead) -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e