![](https://seccdn.libravatar.org/avatar/6ee44c890a328d81b06459f36d1e3f64.jpg?s=120&d=mm&r=g)
On 23/02/2020 15:29, Vojtěch Zeisek wrote:
I had had some time ago Brother multifunctional laser printer and scanner, I downloaded set of packages and script (as You did). The installation was basically smooth, I just had to manually install some missing libraries (I manually installed the packages one-by-one using zypper), and then ran the script (it also did some CUPS configuration). Apart of manual install of some packages and fact that the driver was 32-bit only, it was smooth. I could then easily manage the printer via local CUPS web interface http://localhost:631/ It was network printer and it allowed several protocols to connect, but no configuration was needed on my firewall.
Well, no luck. I ran the script, it initially mirrored what I'd seen on the reddit post complaining of missing libusb-0.1-4 so I installed that in YaST along with the 32-bit version, without recommended packages. It pulled in just one other package, glibc-32bit. Tried again. No further errors except for 'File exists' on symbolic link creation and a failed scriptlet. Here's the output: https://susepaste.org/e14dba73 The test page mentioned in the script never printed. I went into YaST and found the printer added under the default Printer Configurations tab. It all looks to be in order. I don't know if I need to change anything under the Print via Network tab. The Print Test Page button again failed, and it advises to check the cups error log, so here it is: https://susepaste.org/671112c3 And here's the cups access log: https://susepaste.org/3bf03179 I checked under localhost:631 in a browser. Again it all appears set up correctly, but printing a test page does nothing. There's no response from the printer. The IP address is configured correctly on the printer itself, in YaST/CUPS, and in the router's static IP assignments. I've also added the ports mentioned in the original post, as mentioned on Brother's website, in YaST -> Firewall, internal zone (incoming UDP Port 54925 / outgoing TCP Port 54921) Have no idea where to go from here. Maybe it's a setting in YaST Printer -> Use CUPS to Print Via Network, but I don't know what to enter there. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org