Patrick Shanahan wrote:
SUSE 9.0 Cable Internet Access
Wife got new box and we decided to go wireless.
Purchased Netgear WGT624 wireless router to replace the Netgear RP114 which has served me faithfully for several years.
But I cannot talk to the WGT624 (192.168.0.1).
wahoo:~ # rcnetwork restart eth0 Shutting down network interfaces: eth0 done Setting up network interfaces: eth0 (DHCP) IP/Netmask: 192.168.1.2 / 255.255.255.0 done
wahoo:~ # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:50:BA:B9:71:F8 inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6587810 errors:57 dropped:136 overruns:57 frame:0 TX packets:6461951 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 RX bytes:527992438 (503.5 Mb) TX bytes:1491372168 (1422.2 Mb)
wahoo:~ # ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data.
--- 192.168.0.1 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6013ms
wahoo:~ # ping 192.168.1.2 PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.155 ms 64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.127 ms
--- 192.168.1.2 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 999ms rtt min/avg/max/mdev = 0.127/0.141/0.155/0.014 ms
Replace with RP114:
wahoo:~ # rcnetwork restart eth0 Shutting down network interfaces: eth0 done Setting up network interfaces: eth0 (DHCP) failed
wahoo:~ # ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=5.55 ms 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=1.09 ms
--- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1017ms rtt min/avg/max/mdev = 1.094/3.325/5.556/2.231 ms
wahoo:~ # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:50:BA:B9:71:F8 inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6590810 errors:57 dropped:136 overruns:57 frame:0 TX packets:6464931 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 RX bytes:529918728 (505.3 Mb) TX bytes:1491734541 (1422.6 Mb)
wahoo:~ # ping 192.168.0.2 PING 192.168.0.2 (192.168.0.2) 56(84) bytes of data. 64 bytes from 192.168.0.2: icmp_seq=1 ttl=64 time=0.163 ms 64 bytes from 192.168.0.2: icmp_seq=2 ttl=64 time=0.123 ms 64 bytes from 192.168.0.2: icmp_seq=3 ttl=64 time=0.119 ms
--- 192.168.0.2 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.119/0.135/0.163/0.019 ms
What am I missing or doing incorrectly, or is the WGT624 no good?
Hello, Can you post output of the command iwconfig wlan0 Also, your network card is eth(x), and wireless is always wlan(x) If everything is correct, you should see name of the essid of your router. -- Kulla