In data domenica 2 dicembre 2018 20:23:00 CET, Dave Howorth ha scritto:
On Sun, 02 Dec 2018 13:07:49 +0100
stakanov <stakanov@eclipso.eu> wrote:
So port is actually 21. The info is only available shortly after
boot: From their website:
Within the first seconds after power on a ftp connection needs to
be
established to the FRITZ!Box at 192.168.178.1 and the the following
ftp commands need to be run:
ftp> quote USER adam2 ftp> quote PASS adam2
Sorry, diving in with no real understanding of what is being discussed :(
But is what you wrote suggesting that your Fritz!box has a fixed default username and password to reflash the box? That sounds terribly last century, if so. My uninformed opinion suggests that they have a better reputation than that. In which case, are you sure that those are the correct values to use for YOUR Fritz!box? Maybe there's printing on the box, or on a piece of paper that came with it? you define users. These users have defined rights. You need to give clearance for these users for actions to be authorized in your home network. In order to flash the easiest is to set it back to factory defaults (what I did). The issue is that the documentation howto is on a server which is unfortunately down. AVM has a good reputation. The do support their modems for more than 10 years. But that does not mean that it is easy to install a custom firmware. In my case it is the lack of experience with the procedure the culprit not AVM. Bear in mind that OSS firmware is NOT in the interest of the vendor because your device lives longer and sometimes...does more.
_________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org