Am 21.11.22 um 15:00 schrieb Ianseeks:
On Monday, 21 November 2022 13:51:39 GMT Carlos E. R. wrote:
On 2022-11-21 14:31, Ianseeks wrote:
Hi
I removed the nvidia board and installed my new old HD6570 and booted up but it just drops to a cli login with an error about SP5100-tco (nvidia also displays this message so i've assumed its not important).
It first blew out with an error to say i had to enable a BIOS setting for Virtualisation which I did and it cleared that error.
I've also put "radeon.cik_support=1 radeon.si_support=1" on the kernel parameters via yast but still no joy.
The Radeon software is installed and running according to the logs, i've checked journalctl for Radeon errors but no joy.
What simple thing have I missed as I'm a bit out of my depth here?
Did you remove the Nvidia drivers and software?
aha.. no i didn't. I was using Nouveau. I thought the system would detect the card and use the correct drivers so i left it there.
Besides that, I had to do nothing to get my AMD card working. I installed nothing.
Mine is this one:
Model: "Micro-Star International Co., Ltd. [MSI] Radeon RX 580 Armor 4G OC" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x67df "Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]" SubVendor: pci 0x1462 "Micro-Star International Co., Ltd. [MSI]" SubDevice: pci 0x3418 "Radeon RX 580 Armor 4G OC" Revision: 0xe7 Driver: "amdgpu"
-- Cheers / Saludos,
Thanks Carlos. I'll try that and remove nouveau.
Carlos E. R. (from 15.3 x86_64 at Telcontar)
There could also some config files for x left, i am not expert in this, last time 10 years in past i removed my last nvidia card, i remember i had to delete some config files manually (and searched long for this), since there never installed nvidia drivers again ;-)) you may have to start yast (maybe in console mode) to check if the needed amd drivers are installed. (hopefully it will pop up after start) simoN -- www.becherer.de