I have an issue. I have two qlogic controllers in my SLES 9.3 system. I'm using multipath to have redundant access to my storage array. One of the paths has died but I can't seem to figure out which controller is dead. Here is some output that is probably useless: # lspci|grep Q 0000:07:01.0 Fibre Channel: QLogic Corp.: Unknown device 2422 (rev 02) 0000:07:01.1 Fibre Channel: QLogic Corp.: Unknown device 2422 (rev 02) 0000:07:02.0 Fibre Channel: QLogic Corp.: Unknown device 2422 (rev 02) 0000:07:02.1 Fibre Channel: QLogic Corp.: Unknown device 2422 (rev 02) # multipath -l dm names N dm table 3600c0ff0000000000923927119b33d00 N dm table 3600c0ff0000000000923927119b33d00 N dm status 3600c0ff0000000000923927119b33d00 N dm info 3600c0ff0000000000923927119b33d00 O <snip> 3600c0ff0000000000923927119b33d00 [size=1396 GB][features="1 queue_if_no_path"][hwhandler="0"] \_ round-robin 0 [active] \_ 1:0:0:1 sdd 8:48 [active][ready] 3600508e0000000001591b0e0e9e35f0f [size=67 GB][features="0"][hwhandler="0"] \_ round-robin 0 [active] \_ 0:0:2:0 sdb 8:16 [active][ready] <snip> As always, any help would be appreciated. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org