At 10:35 PM 6/11/2005 +0200, Richard Bos wrote:
How should I devide 3 HD and 1 DVD-RW over the ide master slave channels? There is 1 HD already connected to the system, which is at the moment booting the machine (of course ;). I want to add the 2 HDs in a raid. The current HD should be kept so data can be copied from it, but there is no need to from it.
Is it okay to have a configuration, like: Current HD on ide0-master New HD in raid on ide0-slave New HD in raid on ide1-master DVD-RW on ide1-slave
The HDs are in raid(1) for backup not to improve read access.
I think that most IDE controllers write to one drive or the other (not both at the same time) so for reasonable performance, I was always advised to place the devices I wanted to perform best, especially when copying to each other, on different controllers. That said, I think you need to have the DVD as a slave device. So your sample config with the mirrored drives split across two controllers (IDE0 and IDE1) should work a little better than, say, putting both of them on the IDE1 controller as master and slave. My 0,015 [Government]A government which robs Peter to pay Paul can always depend on the support of Paul. --George Bernard Shaw --... ...-- -.. . -. ----. --.- --.- -... tpeters@nospam.mixcom.com (remove "nospam") N9QQB (amateur radio) "HEY YOU" (loud shouting) WEB ADDRESS http//www.mixweb.com/tpeters 43° 7' 17.2" N by 88° 6' 28.9" W, Elevation 815', Grid Square EN53wc WAN/LAN/Telcom Analyst, Tech Writer, MCP, CCNA, Registered Linux User 385531