Hi Folks, I'm hoping you can help. I'm working with SuSE attached to a CLARiiON array and the SuSE SCSI stack is incorrectly reporting CLARiiON devices. SuSE SLES 7, v7.3, and v8.0 all experience the same problem. The problem is as follows: When a SuSE host is attached to the CLARiiON, it is inaccurately reporting that there are 254 devices per HBA. For clarity's sake, I do not think that problem is that Linux doesn't support more than 128 devices....that isn't the problem here. For instance, if a system has two HBAs with only 8 CLARiiON devices allocated to each HBA for a total of 16 actual devices, the SuSE distributions will report 254 devices per HBA. The system should see only a total of 16 CLARiiON devices, but instead, it reports that it sees 508. This happens with the qla2x00.o and qla2200/qla2300.o drivers that are incorporated into the SuSE distributions as well as the 'EMC-approved' v4.47.16 qLogic driver and v4.20L Emulex driver. RedHat doesn't have this problem when attached to CLARiiON arrays, but their SCSI scanning is definitely different. I have put together a couple of patches, but so far haven't come up with the right combination to correct the problem. Has anyone seen this previously? If so, do you have a patch to resolve the problem ? Thanks in advance for the assistance. Heather