I think you have to use only one of the CONFIGURE sections. In the conf.modules I have: alias char-major-14 sb options sb esstype=1869 io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330 post-install sound insmod -k opl3 io=0x388 options sound dmabuf=1 ------------------------------------------------------------------------ Here is my isapnp.conf. # # Trying port address 0203 # Board 1 has serial identifier d7 ff ff ff ff 03 00 73 16 # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier d7 ff ff ff ff 03 00 73 16) # Vendor Id ESS0003, No Serial Number (-1), checksum 0xD7. # Version 1.0, Vendor version 1.0 # ANSI string -->ESS ES1869 Plug and Play AudioDrive<-- # # Logical device id ESS1869 # (CONFIGURE ESS0003/-1 (LD 1 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode (DMA 0 (CHANNEL 1)) # Next DMA channel 0 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode (DMA 1 (CHANNEL 5)) # IRQ 5. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 7 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 0 bytes # Number of IO addresses required: 16 (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 0 bytes # Number of IO addresses required: 2 (IO 2 (SIZE 2) (BASE 0x0330)) # End dependent functions (NAME "ESS0003/-1[1]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY) -- To get out of this list, please send email to majordomo@suse.com with this text in its body: unsubscribe suse-linux-e Check out the SuSE-FAQ at <A HREF="http://www.suse.com/Support/Doku/FAQ/"><A HREF="http://www.suse.com/Support/Doku/FAQ/</A">http://www.suse.com/Support/Doku/FAQ/</A</A>> and the archive at <A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html"><A HREF="http://www.suse.com/Mailinglists/suse-linux-e/index.html</A">http://www.suse.com/Mailinglists/suse-linux-e/index.html</A</A>>