![](https://seccdn.libravatar.org/avatar/5a94d2f8a5845d5f1c1ea1556fc0cb72.jpg?s=120&d=mm&r=g)
On 05/15/2008 06:38 AM, Charles philip Chan wrote:
Joe Morris
writes: Thanks for confirming it is still possible. Since I have already ruled out libata as the problem (by going back to the ide module), which made it to 86% before it failed, what burning program did you use? If k3b, which version? I am running 1.04, but assuming you used k3b, and the version on the original DVD, I could try reverting.
Strange, I have no problems at all. Although I am using k3b 1.1 SVN right now, I had no problems with 1.0.4. Are you sure your drive is OK? What errors are in the log in k3b?
Charles
I know the drive is capable of burning DVD+R DL media, but it has been a couple years ago (9.3 IIRC). Log follows: [growisofs] 5158141952/6020851712 (85.7%) @2.5x, remaining 4:15 RBU 100.0% UBU 92.6% [growisofs] 5169643520/6020851712 (85.9%) @2.5x, remaining 4:11 RBU 100.0% UBU 94.4% [growisofs] 5181276160/6020851712 (86.1%) @2.5x, remaining 4:08 RBU 100.0% UBU 90.7% [growisofs] 5187895296/6020851712 (86.2%) @1.4x, remaining 4:06 RBU 100.0% UBU 87.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:07 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:07 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:08 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:08 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:09 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:09 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:10 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:10 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:11 RBU 100.0% UBU 100.0% [growisofs] 5187895296/6020851712 (86.2%) @0.0x, remaining 4:11 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:12 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:13 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:13 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:14 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:14 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:15 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:15 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:16 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:16 RBU 100.0% UBU 100.0% [growisofs] 5187928064/6020851712 (86.2%) @0.0x, remaining 4:17 RBU 100.0% UBU 100.0% [growisofs] :-[ WRITE@LBA=26a730h failed with SK=3h/ASC=02h/ACQ=00h]: Input/output error [growisofs] :-( write failed: Input/output error I noticed the speed went to 0.0, and soon after it failed. This is the last (5th) DL coaster, tried using the IDE system instead of libata (where I created the first 4). I will try it on another machine and see if it is k3b or not. That will use different hardware, but everything else is basically the same. You do mean you have no problems with DL media burning? Because up to now, I have had no problems with regular DVDR or CDR(W). It is only now that I need to copy a DL disk (5.6 GB). K3b created the iso with no problems. But 5 attempts at burning have left me with 5 failures. -- Joe Morris Registered Linux user 231871 running openSUSE 10.3 x86_64 -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org