Are there any smart (disk monitor) config experts out there? I have a system with a couple of RAID arrays controlled by 3ware 9500s-8 controllers and I'm trying to configure SMART for them. I recently installed opensuse 10.3 on the machine and see things like this in /var/log/messages: Feb 6 10:16:11 suse1 smartd[4133]: Device: /dev/sdb, opened Feb 6 10:16:11 suse1 smartd[4133]: Device /dev/sdb, please try adding '-d 3ware,N' Feb 6 10:16:11 suse1 smartd[4133]: Device /dev/sdb, you may need to replace /dev/sdb with /dev/twaN or /dev/tweN I've looked in /etc/smartd.conf and at the man pages for smartd.conf and smartctl but I'm still confused about exactly what I need to put in the config file! :( There's way too much info and not enough examples. Just one line for the controller? Or a separate line for the controller and every disk? Are they sd*, twa* or twe* and if twa* or twe* does that need configuring anywhere else on the system as well? I'm also not sure whether to enable any testing with smart. I do have 3dm2 running so I get some info from that via the browser and mail. I'm nervous about experimenting because this is my main file server. Has anybody got an example configuration I could copy? Cheers, Dave -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org