From: Álvaro A. Novo <novo@uiuc.edu> Date: Sun, 19 Nov 2000 09:45:39 -0600 Message-Id: <00111909453900.00417@friedman> Subject: Re: [SLE] CD writer problem On Sunday 19 November 2000 03:45, charlie ti wrote:
<4>hdc: YAMAHA CRW4001, ATAPI CDROM drive <4>hdc: ATAPI 6X CD-ROM CD-R/RW drive, 2048kB Cache <4>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4>scsi : 1 host. <4>scsi : detected total. <4>Partition check: <4>ATAPI device hdc: <4> Error: Not ready -- (Sense key=0x02) <4> (reserved error code) -- (asc=0x3a, ascq=0x01) <4> The failed "Read Cd/Dvd Capacity" packet command was: <4> "25 00 00 00 00 00 00 00 00 00 00 00 " <4> hde: [PTBL] [1027/255/63] hde1 hde2 < hde5 hde6 >
I am no expert, but it seems: 1) hdc is first being recognized as ATAPI 2) then, SCSI emulation fails I believe that the problem is 1) and, my best guess is that you are failing to pass the following: append="hdc=ide-scsi" So, enter that in your /etc/lilo.conf (say after, label = linux, or whta's appropriate in your case) and re-run lilo. Then reboot. In your /var/log/boot.msg you should see: <4>ide_setup: hdc=ide-scsi and no ATAPI messages concerning hdc Hope it helps, Alvaro Novo SuSE 6.4 -=- Kernel 2.2.16 -=- KDE 2.0.0-0 9:43am up 10:46, 5 users, load average: 0.05, 0.42, 0.55