You may need to use additional LAN switch; otherwise it takes too long for Linux to configure interface after link up (which is what happens when you connect Linux directly). Ok, that rings a bell. In the howto they spoke about using a second fritz box, I would suppose to do exactly that. I have a spare microtic router. I will try to set it up to the same subnet, so
In data domenica 2 dicembre 2018 13:44:43 CET, Andrei Borzenkov ha scritto: provided I have the fritzbox in lan mode, would I then communicate to the port 2 or to the port 1? AVM says the port 1 in LAN mode is to be connected to the router giving access to the internet, so with "exposed host" it should be easy to talk to it via the microtic using the laptop. still,....that is quite a PITA to flash that router....and half of the sites giving howto are either down or not yet setup after the change from LEDE to openWRT (e.g. the only general flash howto is in Japanese). _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org