-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Friday 28 February 2003 11:33 am, Greg Freemyer wrote:
Has anyone got SuSE Linux 8.1 Pro working with a RAID1 set using the built in ATA controller in a Compaq DL320 G2. It´s a AMI/LSI based MegaRAID IREal 100. The installation detects the separate disks but not the raidset.
Peter Magnusson
Peter,
A quick look at the HP site shows they have Linux compatible firmware and a driver for the DL320.
firmware: http://h18007.www1.hp.com/support/files/server/us/download/10556.html
driver: http://sourceforge.net/projects/cpqarray/
Is this relevant to your hardware and do you have the firmware installed. The driver is in the standard SuSE release (./drivers/block/cpqarray.c), but I'm not positive it is enabled in .config, or maybe you have to load it as a module?.
cpqarray is for Compaq's SCSI RAID controllers. The card in this machine might a Fusion device. These have been getting popular among Compaq's DL series servers lately. I had to deal with one last week, but not with SuSE, so I had to use the rescue disk to figure out what drivers were needed. According to hwinfo, it was an LSI Logic card and the drivers it needed were 'mptbase' and 'mptscsih', in that order. This also means that SuSE should install to it just fine. To be absolutely sure, I recommend booting up with the SuSE rescue CD and running: hwinfo --storage_ctrl That will tell you everything you need to know. - -- James Oakley Engineering - SolutionInc Ltd. joakley@solutioninc.com http://www.solutioninc.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE+X6UU+FOexA3koIgRAoE6AJ4q56Jb0++JwUIuSEzPB7vwsBPMrQCfZCCF Ffax4N0g8eBf0XP+i8Plmks= =85/T -----END PGP SIGNATURE-----