![](https://seccdn.libravatar.org/avatar/dcefdbf1fbe7737b010a3a806d826ae2.jpg?s=120&d=mm&r=g)
28 Oct
2004
28 Oct
'04
17:02
You need to configure the routing table on "fireman" so that the packets are sent out the correct NIC.
YaST2 -> Network Services -> routing
Try entries like:
Destination: 192.168.2.0 Gateway: 0.0.0.0 Netmask: 255.255.255.0 Device: eth0 (eth1, or whatever)
Once the routing is setup each box should be able to reach the other.
Jeff
Thanks Jeff I can ping both boxes from each other, is that the same thing?
If you can ping the boxes from each other then your routing is OK. Your firewall isn't stopping anything, so if you still have problems it's a smb configuration problem. Jeff