On Sun, 2002-02-03 at 05:56, Art Fore wrote:
I have Dell I8100 with NVIDIA Geforce2 Go which I have been trying to get going reliably for 4 months now. I am running Suse 7.3 which I upgraded to 2.4.17 kernel and then upgraded to XFree86 4.2. Other problems seem to be fixed, but have a new one. When I try to use the gui login, it still loads the opensource glx where it should load the NVIDIA GLX, and the keyboard does not work. If I login mode 3 command line, login, then startx, is loads NV-GLX.
I have done the switch2nvidia_glx which runs, then log in, it seems to be OK, but is still running NV_GLX according to XFree86.0.log. When I reboot, I have to run the switch2nvidia_glx again to get things to work.
Two Questions.
1. Should this not be NVIDIA_GLX instead of NV_GLX? (I am using 1.0.2313 Nvidia drivers)
2. How can I get the proper GLX to load when I use gui login?
Art
I have an NVidia and here is my /etc/X11/XF86Config file: Section "Device" BoardName "AutoDetected" Driver "nvidia" Identifier "Device[0]" Option "NvAGP" "1" Option "dpms" VendorName "AutoDetected" EndSection NvAGP 1 makes the device use the special Nvidia AGP module and driver is nvidia Try this too:
cat /proc/nv/card0 ----- Driver Info ----- NVRM Version: NVIDIA NVdriver Kernel Module 1.0.2314 Fri Nov 30 19:33:20 PST 2001 Compiled with: gcc version 2.95.3 20010315 (SuSE) ------ Card Info ------ Model: GeForce2 GTS/GeForce2 Pro IRQ: 11 Video BIOS: 02.15.01.13 ------ AGP Info ------- AGP status: Enabled AGP Driver: NVIDIA Bridge: Via Apollo Pro SBA: Supported [disabled] FW: Unsupported [disabled] Rates: 2x 1x [2x] Registers: 0x1f000203:0x00000102
Matt
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/support/faq and the archives at http://lists.suse.com