Ok i been fooling around with this, and suspect I am missing something dumb... I have the following SOHO network configuration - Internet | Router A 169.254.1.1 | |-----169.254.1.200 Router B 192.168.20.1 --------- 192.168.20.100 Machine A | 169.254.1.100 (eth0) OpenSuSE Gateway Machine with SuSEFirewall 192.168.10.1 (eth1) | | 192.168.10.20 Machine B So how do I set up the SuSEFirewall and the network routing tables on the OpenSuSE Gateway to allow Machine B to see Machine A? I did set up a route in the Routing Table in YaST2 for the network interfaces as follows - Destination 192.168.20.0 Genmask 255.255.255.0 Gateway 169.254.1.200 Device eth0 The gateway address for Machine A is set to 192.168.20.1 The gateway address for Machine B is set to 192.168.10.1 The gateway address for the OpenSuSE Gateway Machine is set to 169.254.1.1 So far I have been unable to get Machine B to even ping Machine A. Is the SuSEFirewall interfering and if so what do I have to do to make it behave? I tried a few things with it also, but so far no joy. Gotta be something dumb I am missing, appreciate and thanks in advance for a bit of help.. Marc... -- "The Truth is out there" - Spooky -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org