K6 was 2.2v core, 3.3v i/o -----Original Message----- From: Ron Morgan [SMTP:ronm@cyrix.com] Sent: Wednesday, December 29, 1999 4:25 PM To: SUSE Discussions (E-mail) Subject: Re: [SLE] K6-II upgrade It all depends on your MB. if it is older you will not be able to go to a k62 as it uses a 2.2 or 2.4 volt core and the k6 was a 2.8 or a 3.3? I dont remember but most MB from the k6 days wont go down to 2.4 volts for the core.. Ron Darren R. Weber wrote:
On Wed, 29 Dec 1999, you wrote:
Hi, as I've got no manuals,is K6 CPU replacing just a detach-attach proc. (after detaching the cooler :-) and configuring the jumper) or do I need to work on other config sides?
Thanks, Ciao
Stefano
It probably depends on your motherboard. In most cases it's a simple operation. Pull out the old, swap a jumper or two, put in the new. You may have a motherboard that configures automatically though, or one that needs adjustments in the bios.
If I were you I would try to find some info on the net about your motherboard before I did the upgrade. Make sure it supports the processor for one, and then find out how to make the changes. It really shouldn't be too hard.
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Darren R. Weber drw@linuxfan.com ICQ# 2849193 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
-- Ron Morgan jr. Cyrix Dallas Texas //If you remain calm, You dont know all the facts! // ronm@cyrix.com gojoe@home.com -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/ "WorldSecure Server <lombard.co.uk>" made the following annotations on 12/30/99 09:21:11 ------------------------------------------------------------------------------ The opinions expressed within this email represent those of the individual and not necessarily those of Lombard. The contents of this Email may be privileged and are confidential. It may not be disclosed to or used by anyone other than the addressee(s), nor copied in any way. If received in error, please advise the sender, then delete from your system. ============================================================================== -- To unsubscribe send e-mail to suse-linux-e-unsubscribe@suse.com For additional commands send e-mail to suse-linux-e-help@suse.com Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/