Hello, In the Message; Subject : Re: [opensuse] Is your clamav 0.101.2 working properly? Message-ID : <10096cc4-1655-5c10-cd35-d771807dd2b0@suddenlinkmail.com> Date & Time: Fri, 21 Jun 2019 23:34:59 -0500 [DCR] == "David C. Rankin" <drankinatty@suddenlinkmail.com> has written: DCR> On 06/21/2019 11:09 PM, Masaru Nomiya wrote: DCR> > To check this, try; DCR> > DCR> > $ ldd /usr/bin/clam* | grep libclamms DCR> > DCR> > You will get; DCR> > DCR> > libclammspack.so.0 => not found DCR> > libclammspack.so.0 => not found DCR> > libclammspack.so.0 => not found DCR> > libclammspack.so.0 => not found DCR> What release 42.3, 15.0, 15.1 or Tumbleweed? DCR> > DCR> > In my case; DCR> > DCR> > libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007fa6ac38f000) DCR> > libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007ff5cdbdf000) DCR> > libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007f1e55793000) DCR> > libclammspack.so.0 => /usr/lib64/libclammspack.so.0 (0x00007eff03dad000) DCR> > DCR> > Because, I made clamav-0.101.2-1.1.src.rpm by my self with the release DCR> > of clamav-0.101.2.tar.gz, then compile & installed. DCR> How did you include the new source in the current srpm (or are DCR> you saying you downloaded the new .src.rpm and used rpmbuild DCR> --rebuild clamav-0.101.2-1.1.src.rpm ? I downloaded clamav-0.101.2.tar.gz, then compiled it to see the results. Then, I made clamav.spec file & clamav-0.101.2-1.1.src.rpm file with rpmbuild -bs clamav.spec. Regards, --- ┏━━┓彡 野宮 賢 mail-to: nomiya @ galaxy.dti.ne.jp ┃＼／彡 ┗━━┛ 「eメールや携帯電話に縛られた社会は、自分自身と向き合ったり、 空想にふけったりする自由を奪う。」 -- M. Crichton -- -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse+owner@opensuse.org