Kenneth Schneider wrote:
On Thu, 2007-02-15 at 11:59 +0100, Andreas Jaeger wrote:
Danesh Daroui <Danesh.D@bredband.net> writes:
I ran hwinfo --wlan and the result is:
12: PCI 202.0: 0200 Ethernet controller [Created at pci.286] UDI: /org/freedesktop/Hal/devices/pci_14e4_4320 Unique ID: rBUF._LuIAhxm4a3 Parent ID: qscc.S+4MMSCCLf5 SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:02:02.0 SysFS BusID: 0000:02:02.0 Hardware Class: network Model: "Hewlett-Packard Company nx9500 Built-in Wireless" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4320 "BCM4306 802.11b/g Wireless LAN Controller" SubVendor: pci 0x103c "Hewlett-Packard Company" SubDevice: pci 0x12f4 "nx9500 Built-in Wireless" Revision: 0x03 Driver: "bcm43xx" Driver Modules: "bcm43xx" Device File: eth0 Features: WLAN Memory Range: 0xd0200000-0xd0201fff (rw,non-prefetchable) IRQ: 201 (no events) HW Address: 00:90:4b:53:b6:21 WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412e-05 2.417e-05 2.422e-05 2.427e-05 2.432e-05 2.437e-05 2.442e-05 2.447e-05 2.452e-05 2.457e-05 2.462e-05 2.467e-05 2.472e-05 2.484e-05 WLAN bitrates: 1.2e-05 1.8e-05 2.4e-05 3.6e-05 4.8e-05 7.2e-05 9.6e-05 0.000108 2e-06 4e-06 1.1e-05 2.2e-05 WLAN encryption modes: WEP40 WEP104 WLAN authentication modes: open sharedkey Module Alias: "pci:v000014E4d00004320sv0000103Csd000012F4bc02sc80i00" Driver Info #0: Driver Status: bcm43xx is active Driver Activation Cmd: "modprobe bcm43xx" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #8 (PCI bridge)
I think it shows that my wireless card is installed successfully but I can not still connect to a network...
Broadcom support is not quite fully working yet :-(
Andreas
It may not be fully working but the bcm43xx does, it is also in the Linksys WPC54G which works quite well in my laptop. The OP needs to extract the drivers from the windows .sys file and add them to /lib/firmware.
I have .sys driver files for Windows. How can I use thin in OpenSuse without ndiswrapper? -- To unsubscribe, e-mail: opensuse+unsubscribe@opensuse.org For additional commands, e-mail: opensuse+help@opensuse.org